A chemical equation is a representation of & chemical reaction with the help of symbols and formulae of the substances involved in the reaction. It is chemical shorthand for representing the reacting substance or substances combining (the reactants) and the substance or substances formed as a result of the reaction (the products)

Molecular Equations

A Molecular equation is the one which shows the reactants combining and the products formed, in their elemental or molecular forms in a chemical reaction. An example of 2 molecular equation is the reaction between sodium and water to produce sodium hydroxide solution and hydrogen gas 2Na(s) + 2H20(1) -> 2NaOHllag) + 122) In this context, sodium (in elemental form) reacts with water (in molecular form) to produce sodium hydroxide (in molecular form) and hydrogen gas (in molecular form).

Word Equations for given Chemical Reactions Write word equations for given chemical reactions A word equation isa short form of expressing a chemical reaction by word. Chemical reactions can be summarized by word equations that show all the reactants and the products, This type of equation links together the names of the reactants and the products. For examples, the burning of magnesium in air to produce magnesium oxide can be represented by the following word

equation Magnesium + Oxygen —> Magnesium oxide Another example isthe reaction between sodium and chlorine to give sodium chloride (common salt) Sodium + Chlorine — Sodium ehloride Equations ike these sometimes give us some information about the products formed when different substances are reacted together. But equations can be made even more useful by writing them using chemical symbols and forrmutae Any method for representing a chemical reaction must meet basic certain requirements. ‘These

• the chemical nature of the reactants as well as those of the products must be clear- The reactants

can be in solid, gaseous, liquid or aqueous forms,

• the mole ratios in which the products are combined and the products are formed must be

deducible. This means that atoms of the reactants and the products must be balanced

• the direction of the reaction must be established. This means that it should be clearly shown

which substances are the reactants and which ones are the products. ‘This is normally done by separating the reactants from the products by an arrow, The arrow normally points from the reactants to the products ‘Consider the reaction between potassium and water: 2K(3) + 2H20 (1) > 2KOH (aq) + H2 (2) In this reaction, the three requirements have been met

• The chemical nature of the reactants [potassium (solid); water (liquid)] and the products

[potassium hydroxide (aqueous); hydrogen (gas) has been shown.

• ‘The mole ratios of the reactants and products are clearly shown: 2 moles of potassium combines

with 2 moles of2water to produce 2 moles of potassium hydroxide and one mole of hydrogen as

• The reactants (potassium and water) and the products (potassium hydroxide and hydrogen) are

separated by an arrow (—+) which also indicates the direction of the reaction,

HOW TO PREDICT REACTION PRODUCTS

‘To predict the reaction produets precisely, one needs to take into account the type of reaction ‘occurring, Once you identify the type of reaction that is going to take place, then you will be in a position of telling what possible products of reaction would be. A chemical reaction is said to have taken place when two or more chemical substances called reactants are converted into very different chemical substances called products.

There are a few ways to predict the reaction products. Firstly, when the reactants are mixed and then isolated, products can be identified, Prediction can also be made when elements from the same group in the Periodic Table show similar reactions. Finally, chemical reactions can be classified into different categories such as combination (or synthesis), decomposition, displacement, precipitation, and redox reactions as described in details below

‘Types of Chemical Reactions When a chemical reaction occurs, it is obvious that the changes have taken place. However, under ordinary conditions it is not easy to see how a reaction goes on. The neutralization of an acid solution with an alkali produces no change that you can see. However, reaction has happened. ‘The temperature of the mixture increases and the new substances have formed which can be separated and purified. Ideally, we can tell whether a reaction has taken place if one or

more of the following changes are observed:

• Heat change has taken place and can be detected by the change in temperature of the

products

• a precipitate is formed:
• there is a change in state ofthe reactants, Le. gas, liquid; solid;

(d)a colour change has occurred; oF

• gas is evolved and can be identified by its colour, smell or by effervescence,
• heat change has taken place and can be detected by the change in temperature of the products;
• aprecipitate is formed;
• there is # change in state of the reactants, i.e. gas, liquid; solid;
• acolour change has occurred; or
• 4.gas is evolved and ean be identified by its colour, smell or by effervescence

There are very many different chemical reactions. To make it easy to study about these reactions, itis useful to try to group certain types of reactions together, They may be grouped according to certain types of phenomena which accompany them. They can further be subdivided into categories of reactions, each of which has its unique characteristics. Some types of chemical reactions are discussed below: Combination or synthesis (A +B — C)

Symthesis reaction occurs when two or more simple substances (elements cr compounds) a4e combined to form one new and more complex substance. The general form of a synthesis reaction is element or compound ~ element or compound compound.

The reaction between iron and sulphur to form iron (Il) sulphide is the best example for this kind of reaction. Iron combines directly with sulphur to form iron (II) sulphide: Fe(s) + Sts) —+ FeS(s) Another example is the reaction between hydrogen and oxygen to form water Hydrogen + Oxygen —> Water Decomposition (A +B +C) Decomposition occurs when one compound breaks down into simpler substances. All decomposition reactions have one thing in common: There is only one reactant and it breaks

down into two or more simpler products. Decomposition can be brought about by heat, light electricity and even enzymes or catalysts. Decomposition by heat Decomposition caused by heat is termed as thermal decomposition. An example is the decomposition of calcium carbonate (limestone) which breaks down into calcium ‘oxide(quicklime) and carbon dioxide gas when heated Caleium carbonate — Caleium oxide + Carbon dioxide

Formula Equations Using Chemical Symbols

Write formula equations using chemical symbols Essentially, chemical reactions can be expressed in two forms. The chemical reaction can be expressed either as « word equation or as a formula (or symbolic) equation. We have already seen how chemical equations can be represented by words (word equation) The formula equation makes use of chemical symbols and formulae to represent a chemical reaction, An ‘example is the reaction between iron and sulphur to form iroa (Il) sulphide Fe +S — FeS

Steps for writing a chemical equation These are the steps to follows when writing a chemical equation:

• State the reaction equation in words, for example, carbon reacts with oxygen to form carbon

dioxide.

• Write the complete word equation using an arrow to separate the reactants from the products

Carbon + Oxygen — Carbon dioxide. Conventionally, the reactants are placed on the lefi-hand side and the products on the right-hand side of the equation. An arrow from left to right indicates that the reaction proceeds from reactants to products as shown

• Change the words into the correct symbols and formulae of the reactants and products: C + 02

CO.

• Balance the number of each type of atoms on each side of the equation It is important to make

sure that there is equal number of each kind of atom on the left of a chemical equation as on the right in order for your equation 10 comply with the Law of Conservation of Mass (or Indestructibility of Matter: Matter can neither be created nor destroyed in the course of @ ‘chemical reaction. This means that the total mass of all products of a chemical reaction is equal to the total mass of all reactants, All atoms appearing on the left-hand side must also be

presented on the right-hand side. No atom should appear as a product if it is not present as @ reactant

• Add the state symbols: Reactants and products may be solids, liquids, gases or solutions. You

show their state by adding state symbols to the equation The state symbol ate, (s) for solid, (1) for liquid, (g) for gas and (aq) for aqueous solution (solution in water), For the two reactions above, the equations with the state symbols are: Feje) * Se) + FeSioj; Cus + Og) > CO2y) All state symbols must be bracketed and placed as subscripts after the reactant(s) and product(s).

Balancing Chemical Equations

Balance chemical equations AA balanced chemical equation has an equal number of atoms of different elements of the reactants and the products on both sides of the equation. A balanced equation gives us more information about a reaction than we get from a simple word equation Below isa step-by-step approach to working out the balanced equation for the reaction

• Write the chemical equation for the reaction with the correct symbols and formulae of the

reactant(s) and the products) 2 Identify diferent atoms of the different elements of the reactant(s) and the product(s)

• Chock whether these different atoms are equal on both sides of the equation, Some atoms may

balance each other directly

• Balance the atoms on each sides ofthe equation by Hit and Trial Method.
• Add state symbols.

Example 1

The reaction between hydrogen and oxygen to produce water Hydrogen + Oxygen > Water Hz + O20 (not balanced) The atoms involved in the reaction are hydrogen and oxygen. It is these atoms that we are going to balance The atoms must be equal on both sides of the reaction equation. There are two hydrogen atoms on each side of the equation. But, es you can see there are two oxygen atoms on the left-hand side (LHS) of the equation and only one oxygen atom on the right-hand side (RHS)

To balance oxyaen stoms, we write 2 before water. Hy +O: —+ 2H,0 (not balanced yet) By introducing 2 before water, another problem has been created. Now we have 4 hydrogen atoms on the RHS but only 2 hydrogen atoms on the LHS. To equalize the number of hydrogen atoms we write 2 before hydrogen on the LHS.

2H: + 0; + 2H0 (balanced), You can still check to find out whether the atoms are balanced or not. Now lock at the number of atoms on each side ofthe equation

LHS: RHS

4 hydrogen atoms —____» 4 hydrogen atoms 2 oxygen atoms 2 oxygen atoms Now, the number of hydrogen and oxygen atoms is the same on both sides of the equation. This is because the atoms do not disappear during a reaction, They are neither created nor destroyed They obey the Law of Conservation of Mass, When the numbers of different atoms are the same ‘on the both sides, an equation is said to be balanced. Once the equation is balanced you can now

add the state symbols. 2H) + Org) * 2204) ‘This gives a standard and an acceptable chemical equation An equation which is not balanced is not correct. An unbalanced equation implies thatthe atoms have heen created or destroyed It is therefore, wrong and calculations based on it are certainly unreliable Remember that we cannot change the formulae of the substances involved in the reaction. These are fixed by the bonding in the substance itself, For instance, in attempt to balance the number of

‘oxygen in water, HO, we cannot write HO: We ean only put a multiplying numbers before symbols and formulae, ¢-¢. 210,

Example 2

Hydrogen burns in oxygen to form water. The equation for the reaction is 2a ~ Ox) +2HS0p) a. How much oxygen is needed to burn Ig of hydrogen? b. How much water is formed when Sg of hydrogen is completely burned in oxygen? (Atomic

Solution

a Reaction equation:2Ha,5+ On.) 2H:0q

Atoms present: HO

Molecular weights: 4 : 32 Reacting weights: 1g: Xg

So, Ig of hydrogen needs 8g of oxygen b. Haq) + O2¢0) > 2H20(n, H:H,0 Molecular masses: 4: 36 Reacting weights: 5g : Xg 5×36 y.

The Different Between Molecular Equations and lonie Equations Differentiate between molecular equations and ionic equations Tonic equations are equations in which the reacting substances are represented in ionic forms after the elimination of spectator ions. In other words, ionic equations are those equations represented in such a way that spectator ions are not included in the final equation. Spectator ions refer to those ions, which do not change during the reaction ie. they do not take part in a

chemical reaction, In order to be able to derive an ionic equation from a molecular equation, one must be acquainted with the solubility rules 2s outlined below: +All sodium, potassium and ammonium salts are soluble.

• Allnitrates, chlorates and acetates are soluble

+All binary compounds of the halogens (other than F) with metals are soluble, except those of silver, copper, lead and mercury (lead halides are soluble in hot water)

• All sulphates are soluble except those of silver, lead, mereury (I), barium, strontium and ealeium,
• All carbonates, sulphites and phosphates are insoluble except those of ammonium and alkali

metal (Group 1) cations,

• All hydroxides are insoluble except those of ammonium, barium and alkali metal (Group 1)

cations +All sulphides are insoluble except those of ammonium, alkali metal (Group 1) cations and alkali earth metal (Group Il cations.

• All oxides are insoluble except those of calcium, bantum and alkali metal (Group 1) cations;

these soluble ones actually reaet with the water (hydrolyse) to form hydroxides,

Balanced Ionic Equations

Steps for writing balanced ionic equations

• Write a balanced formula equation for the reaction

2 Split all soluble reactants and products into individu ions, clearly indicating their state symbols Remember that substances that exists as molecules such as water, gasses and concentrated mmincral acids, precipitates and neutral atoms do not consist of ions and hence do not ionize in water

• Cancel out all the ions which eppear on both sides ofthe equation (spectator ions), These are the

ions which remain unchanged in the reaction

• Re-wte the remaining ions. This is the net ionic equation for tht reaction

Example3

Consider the reaction for neutralization oF hydrochlorie acid with sodium hydroxide

• Step 1: HCl) + NAOH ag + Naha) + HO

2 Step 22H ug7#CT ag tN OFT ag Na agit CT pa) + H: 0p

• Step 3: aytCT aytNa og OH tay) NO" gitCT ag) + Hog)
• Step 4: Hg OH yy) + HO)