Form 5 Chemistry Full Notes
Complete interactive post prepared from the uploaded Chemistry document. The notes are organized for reading, revision, formulas, reactions and questions while retaining the OCR source transcript for every page.
Try a shorter term such as atomic, spectrum, periodic, oxide, alkene, enthalpy or carboxylic.
General Chemistry and Atomic Structure
General Chemistry
General chemistry in the uploaded notes deals with the behaviour and characteristics of electrons, electron occupation in atomic orbitals, atomic structure, atomic spectrum, wave mechanics and chemical bonding.
Main subtopics from the document
- Atomic structure
- Atomic spectrum / hydrogen spectrum
- Wave mechanics
- Chemical bonding
Atomic structure
Atomic structure deals with the structure and components of an atom. The earliest idea treated the atom as an indivisible particle, but later scientific evidence showed that atoms are made of subatomic particles.
| Particle | Nature of charge | Symbol | Relative mass | Position |
|---|---|---|---|---|
| Proton | +1 | p or ¹₁p | 1.00 | Nucleus |
| Neutron | 0 | n or ¹₀n | 1.00 | Nucleus |
| Electron | −1 | e⁻ | 1/1840 | Shell/orbital |
Dalton atomic theory
- Matter is made up of small indivisible particles called atoms.
- Atoms are neither created nor destroyed.
- Atoms of the same element are similar, especially in mass.
- Atoms of different elements are different, especially in mass.
- Atoms of different elements combine in small whole-number ratios.
Modification of Dalton theory
- Matter is not made of indivisible atoms only; atoms contain subatomic particles.
- Atoms can be created or destroyed in nuclear fission and fusion.
- Atoms of the same element may have different masses because isotopes exist.
- Atoms of different elements may sometimes have similar mass values.
- Elements can combine in variable ratios in some compounds.
Thomson experiment: discovery of electrons
Thomson investigated whether air conducts electricity using an emission tube. When the circuit was switched on, the bulb emitted light, the emission tube glowed, fluorescence occurred, and rays moved from cathode to anode. Investigation of cathode rays showed that they behaved as negatively charged particles; these were electrons.
Thomson proposed the plum-pudding model: an atom is a sphere of uniform positive charge with negatively charged electrons embedded in it. The model was later abandoned because it could not explain several experimental facts.
Rutherford scattering experiment
Rutherford bombarded thin gold foil with alpha particles from a radioactive source. Most alpha particles passed through undeflected, some were slightly deflected, and very few were deflected through large angles or bounced back.
- Most of the atom is empty space.
- Positive charge and mass are concentrated in a small dense nucleus.
- Electrons occupy the surrounding space.
- Thomson model could not explain the strong deflection of some alpha particles.
Atomic Spectrum, Quantum Theory and Wave Mechanics
General Chemistry
The source includes worked problems on wavelength, frequency, energy and spectral transitions. It also introduces the quantum theory and wave-particle duality.
Wave and radiation relationships
\[ c=f\lambda \quad \text{or} \quad f=\frac{c}{\lambda} \]
\[ E=hf \]
\[ E=\frac{hc}{\lambda} \]
Electron transition and energy difference
When an electron moves between energy levels, the energy absorbed or emitted is the difference between the two levels.
\[ \Delta E = E_{higher}-E_{lower}=hf \]
Wave-particle duality
\[ \lambda = \frac{h}{mv}=\frac{h}{p} \]
Uncertainty principle
The document includes calculation based on uncertainty in the position of a particle and the accuracy with which its position can be determined.
\[ \Delta x\,\Delta p \geq \frac{h}{4\pi} \]
Common question types from this section
- Calculate frequency from wavelength.
- Calculate energy from frequency or wavelength.
- Compare energies of two radiations of different wavelengths.
- Calculate the frequency or wavelength of lines in the Balmer series.
- Explain dual nature of matter using De Broglie equation.
Inorganic Chemistry and Periodic Table
Inorganic Chemistry
Inorganic chemistry in the document is defined as the study of all elements and their compounds, excluding most carbon compounds except oxides, cyanides and carbonates.
Mendeleev and Lothar Meyer classification
Mendeleev and Lothar Meyer arranged elements according to relative atomic mass. Elements with similar properties appeared at regular intervals, leading to the idea of periodicity.
Some anomalies appeared when elements were arranged by relative atomic mass, such as argon/potassium and cobalt/nickel. These anomalies were explained by isotopes and average relative atomic mass.
Blocks of elements
| Block | Description from the notes | Examples |
|---|---|---|
| s-block | Valence electrons enter s-sub shell. | Group IA and IIA elements |
| p-block | Valence electrons enter p-sub shell; includes many non-metals and noble gases. | Groups IIIA to VIIIA |
| d-block | Elements have partially or fully filled d-sub shell; use s and d electrons in bonding. | Sc, Mn, Fe, Ni, Co, Cu, Zn |
| f-block | Inner transition elements with partially filled f-subshells. | Lanthanides and actinides |
Notes on periods and groups
- Atoms of elements in the same period have the same number of partially or fully occupied shells.
- The group number is related to the number of outermost electrons.
- The period number equals the principal quantum number of the outermost shell.
Periodic Trends in Physical Properties
Inorganic Chemistry
Down the group: atomic radius
Atomic radius increases down the group because new shells are added and inner electrons shield the outer electrons. The outer electron is farther from the nucleus and experiences less effective nuclear attraction.
Ionic radius
Ionic radius is the distance between nuclei of ions in an ionic crystal. Cations are smaller than their parent atoms because electrons are removed, while anions are larger because extra electrons increase repulsion.
Ionization energy
M(g) → M⁺(g) + e⁻M⁺(g) → M²⁺(g) + e⁻Ionization energy generally decreases down a group because atomic size and shielding increase. It generally increases across a period because effective nuclear charge increases and atomic size decreases.
Factors affecting ionization energy
- Effective nuclear energy / effective nuclear charge.
- Shielding and screening effect.
- Atomic radius.
- Sub-level stability; full and half-filled sub-levels require extra energy to remove electrons.
Electron affinity
X(g) + e⁻ → X⁻(g)Non-metals generally have high electron affinity. The most negative electron affinities are found among halogens, because their outer shells are close to completion.
Electronegativity
\[ \text{Electronegativity}=\frac{\text{Effective nuclear charge}}{\text{Covalent atomic radius}} \]
Electronegativity decreases down a group and increases across a period. Fluorine is the most electronegative element.
Melting point trend
Melting point depends on the energy needed to break regular arrangement of atoms or molecules in a crystal. In Period 3, sodium, magnesium and aluminium are metallic; silicon has a giant covalent structure and a very high melting point; phosphorus, sulphur and chlorine have lower melting points because molecules are held by weak Van der Waals forces.
Period Three Chemical Properties
Inorganic Chemistry
The document compares chemical behaviour of Period 3 elements from sodium to chlorine through hydrides, chlorides, hydroxides and oxides.
Hydrides
Hydrides of Period 3 elements include NaH, MgH₂, AlH₃, SiH₄, PH₃, H₂S and HCl. Sodium hydride is strongly ionic; magnesium hydride is largely ionic; aluminium hydride is covalent.
Reaction of hydrides with water
NaH + H₂O → NaOH + H₂MgH₂ + 2H₂O → Mg(OH)₂ + 2H₂SiH₄ + H₂O + 2OH⁻ → SiO₃²⁻ + 4H₂H₂S + H₂O ⇌ H₃O⁺ + HS⁻HCl + H₂O → H₃O⁺ + Cl⁻Strongly metallic hydrides tend to form alkaline solutions, while non-metal hydrides tend to form acidic solutions.
Chlorides
Chlorides of Period 3 include NaCl, MgCl₂, AlCl₃, SiCl₄, PCl₃, PCl₅, S₂Cl₂ and Cl₂. Metallic character decreases across the period, so ionic character of chlorides decreases.
Hydrolysis of chlorides
NaCl does not hydrolyse in water because Na⁺ has low polarizing power. Magnesium chloride hydrolyses strongly on heating and may produce basic magnesium chloride and HCl.
MgCl₂·6H₂O → Mg(OH)Cl + HCl + 5H₂OAluminium chloride hydrolyses readily due to the high charge density of Al³⁺. Silicon, phosphorus and sulphur chlorides hydrolyse to form acidic solutions.
SiCl₄ + 2H₂O → SiO₂ + 4HClPCl₃ + 3H₂O → H₃PO₃ + 3HClPCl₅ + 4H₂O → H₃PO₄ + 5HClS₂Cl₂ + H₂O → 2HCl + H₂S + H₂SO₃Hydroxides
Hydroxides of Period 3 include NaOH, Mg(OH)₂, Al(OH)₃, Si(OH)₄, P(OH)₃, P(OH)₅, S(OH)₆ and Cl(OH). Hydroxides from silicon to chlorine are considered oxy-acids rather than true hydroxides.
Sodium and magnesium hydroxides are true hydroxides because they show OH groups. Aluminium hydroxide is amphoteric.
Oxides
Sodium and magnesium oxides are basic, aluminium oxide is amphoteric, while oxides of silicon, phosphorus, sulphur and chlorine are acidic.
| Oxide | Nature |
|---|---|
| Na₂O | Basic |
| MgO | Basic |
| Al₂O₃ | Amphoteric |
| SiO₂ | Acidic |
| P₄O₆ / P₄O₁₀ | Acidic |
| SO₂ / SO₃ | Acidic |
| Cl₂O₇ | Acidic |
Reaction of oxides with water
Na₂O + H₂O → 2NaOHMgO + H₂O → Mg(OH)₂P₄O₆ + 6H₂O → 4H₃PO₃SO₃ + H₂O → H₂SO₄Cl₂O₇ + H₂O → 2HClO₄Diagonal Relationship and Anomalous Behaviour
Inorganic Chemistry
Diagonal relationship
The first element in a group is small and highly electronegative compared with the rest of its group. It may show similarities with the second element in the next group across the period. This is called diagonal relationship.
Diagonal relationship is important in pairs such as Li and Mg, Be and Al, and sometimes B and Si.
Lithium and magnesium relationship
- Both have small atomic and ionic radii.
- Both form ionic nitrides on heating with nitrogen.
- Both form monoxides on burning in air.
- Carbonates are known only in solution; solid bicarbonates are not stable.
- Hydroxides, carbonates and nitrates decompose on heating to oxides.
- Phosphates, carbonates, fluorides and hydroxides are slightly soluble in water.
- Chlorides show covalent character and dissolve in organic solvents.
- Sulphates do not form alums.
Beryllium and aluminium relationship
- Compounds are mainly covalent, for example BeCl₂ and AlCl₃.
- Metals react with concentrated alkali to form hydroxo complexes and hydrogen.
- Oxides and hydroxides are amphoteric.
- Chlorides hydrolyse in water.
- Chlorides dimerize in vapour state.
- Both can form fluoro-complexes.
Anomalous behaviour of lithium
- Lithium forms covalent compounds more than other alkali metals.
- Lithium reacts with nitrogen to form nitride, unlike most other alkali metals.
- Lithium forms hydroxide and chloride with more covalent character.
- Lithium burns to form monoxide, while other alkali metals form peroxide or superoxide.
- Lithium does not form acetylide with ethyne.
- Lithium nitrate and carbonate decompose differently on heating.
- Lithium hydroxide is less soluble and weaker than NaOH and KOH.
Anomalous behaviour of beryllium
- Beryllium forms hydroxo complexes with concentrated alkali.
- Its oxide and hydroxide are amphoteric.
- BeCl₂ hydrolyses and dimerizes.
- Be does not react with water or steam, while other group members do.
- BeO does not react with water.
- Beryllium carbide hydrolyses to methane, while other carbides produce ethyne.
- Beryllium chloride fumes in moist air due to hydrolysis.
Anomalous behaviour of fluorine
- Fluorine has very small atomic and ionic size.
- It has no d-orbital.
- It has highest electronegativity and high electron affinity.
- It shows only −1 oxidation state.
- It forms strong hydrogen bonds in HF.
- Fluorides differ in solubility from other halides.
- Fluorine liberates oxygen from water and hot alkalis, unlike other halogens.
- Fluorine combines directly with carbon.
Selected Compounds of Metals: Oxides and Hydroxides
Inorganic Chemistry
Metal oxides
Oxides of metals may be prepared directly or indirectly.
Direct preparation of metal oxides
- Burning a metal in air or oxygen.
- Passing steam over a red-hot metal.
- Reacting a metal with oxidizing acid such as HNO₃.
2Mg + O₂ → 2MgO3Fe + 4H₂O → Fe₃O₄ + 4H₂Indirect preparation
Heating carbonates, hydroxides or nitrates can produce metal oxides.
CaCO₃ → CaO + CO₂Cu(OH)₂ → CuO + H₂O2Pb(NO₃)₂ → 2PbO + 4NO₂ + O₂Types of metallic oxides
- Basic oxides
- Acidic oxides
- Amphoteric oxides
- Peroxides
- Superoxides
- Mixed oxides
Basic oxides
Basic oxides react with acids to form salt and water. They may also combine with acidic oxides to form salts. They are often ionic or covalent depending on the metal.
Acidic oxides
Acidic oxides are formed by metals in high oxidation states and by non-metals. They dissolve in water to form oxy-acids.
Amphoteric oxides
Amphoteric oxides react with both acids and bases. Examples include ZnO, Al₂O₃, SnO₂, PbO, Fe₂O₃ and MnO₂.
Peroxides
Peroxides contain the peroxide ion. They are prepared by heating metals in excess oxygen, heating monoxides in oxygen, reacting oxygen with metals in liquid ammonia, or treating metal salt solution with H₂O₂ in alkali.
- Peroxides become more stable down a group.
- They dissolve in water to form alkaline solutions and hydrogen peroxide.
- They behave as oxidizing agents.
Superoxides
Superoxides contain the superoxide ion and are known for potassium, rubidium and caesium.
M + O₂ → MO₂ (M = K, Rb or Cs)- They are yellow solids.
- Stability order: KO₂ < RbO₂ < CsO₂.
- They are strong oxidizing agents.
- They hydrolyse to water, hydrogen peroxide and oxygen.
Mixed oxides
Mixed oxides are composed of two simple oxides. Examples include Pb₃O₄, Fe₃O₄, MgFe₂O₄ and ZnFe₂O₄.
Metal hydroxides
Preparation
- Direct action of water on strongly electropositive metals.
- Action of water on metal oxides.
- Double decomposition with alkalis or ammonia solution.
- Electrolysis of alkali metal chloride solution.
Alkali metal hydroxides
- White crystalline solids.
- Melt at moderate temperatures without decomposition except LiOH.
- Deliquescent and very soluble in water.
- Basic strength increases down the group.
- React with chlorine: cold dilute alkali gives chloride and hypochlorite; hot concentrated alkali gives chloride and chlorate(V).
- Absorb CO₂ to form carbonates.
- React with acids to form salts and water.
Alkaline earth metal hydroxides
- White crystalline solids.
- Solubility increases down the group from Be(OH)₂ to Ba(OH)₂.
- React with acids, carbon dioxide, ammonium salts and sulphur dioxide.
- Decomposition temperature increases down the group.
Uses of hydroxides from the document
- Lime water tests for carbon dioxide.
- Milk of magnesia is used as an antacid.
- Calcium hydroxide is used in mortar, bleaching powder, neutralizing acidic soil, whitewashing, water softening and sugar refining.
- Caustic soda is used in manufacturing silk, paper and soap.
- Caustic potash is used in manufacturing soft soaps.
Organic Chemistry 1: Aliphatic Hydrocarbons and Alkenes
Organic Chemistry
The uploaded notes move into Organic Chemistry 1 and aliphatic hydrocarbons, especially reactions of alkenes.
Stability and addition to alkenes
In long carbon chains, a more stable carbocation forms when the positively charged carbon is surrounded by many alkyl groups because alkyl groups supply electrons.
Hydrogenation
Hydrogenation is addition of hydrogen to alkenes, producing alkanes. The document includes enthalpy calculations based on hydrogenation.
Hydration of alkenes
CH₃CH=CH₂ + H₂O --conc. H₂SO₄/heat→ CH₃CH(OH)CH₃Anti-Markovnikov mechanism with HBr and peroxide
- Peroxide dissociates to give alkoxy free radicals.
- Alkoxy free radical combines with HBr to give a bromine atom/free radical.
- Bromine atom attacks the alkene to form the more stable free radical intermediate.
- The free radical attacks HBr to form anti-Markovnikov product and regenerate bromine radical.
Halogenation
Addition of halogens to alkenes is carried out in inert solvent such as carbon tetrachloride.
R–CH=CH–R + X₂ → R–CHX–CHX–ROxidation reactions of alkenes
Alkenes react with oxidizing agents such as KMnO₄ or K₂Cr₂O₇.
- Cold dilute KMnO₄ or cold alkaline KMnO₄ forms diols.
- Concentrated acidified KMnO₄ or K₂Cr₂O₇ oxidizes alkenes to carboxylic acids or ketones or both.
- Terminal alkenes may produce carboxylic acid, CO₂ and H₂O.
R–CH=CH–R --KMnO₄/OH⁻→ R–CH(OH)–CH(OH)–ROzonolysis
Ozonolysis completely breaks C=C to produce aldehydes, ketones or both depending on the primary structure of the alkene. It is useful for locating the position of double bonds in unknown alkenes.
Thermochemistry and Enthalpy Calculations
Physical Chemistry
Enthalpy change using Hess-type manipulation
The uploaded document includes manipulation of thermochemical equations to calculate enthalpy change, for example for reactions involving iron oxides, carbon monoxide and carbon dioxide.
Calculation based on bond energies
Reactant bonds are normally broken and product bonds are formed. The enthalpy change is calculated as the difference between broken bond energies and formed bond energies.
\[ \Delta H = \sum \text{broken bond energies} – \sum \text{formed bond energies} \]
The document uses examples involving formation of methane and hydrogenation of ethene to ethane using C–H, H–H, C=C and C–C bond energies.
Calculation using atomization data
The notes also calculate enthalpies using atomization data by converting reactants to atoms and then forming products.
\[ \Delta H_{reaction}=\sum E_{atomization} – \sum E_{bond formation} \]
Heat capacity and neutralization
\[ Q=C\Delta\theta \]
\[ Q=mc\Delta\theta \]
\[ C=mc \]
H⁺ + OH⁻ → H₂OThe document includes a calorimetry example where NaOH and HCl solutions are mixed in a calorimeter and the temperature rise is used to calculate standard enthalpy of neutralization.
Aromatic Compounds, Carbonyl Compounds and Carboxylic Acids
Organic Chemistry
Electrophilic substitution in benzene derivatives
The notes explain that halogens are exceptional: although they deactivate the benzene ring, they direct incoming electrophiles to ortho and para positions. This is partly because halogens are small and cause little steric hindrance. Other deactivators usually direct incoming electrophiles to meta position.
For benzoic acid, the carboxyl group deactivates the ring and affects ortho and para positions more strongly, making meta substitution preferred.
Carbonyl compound tests
Fehling/Benedict test
Aldehydes reduce Cu²⁺ to Cu⁺, forming a brick-red precipitate. Ketones do not give this reaction.
RCHO + Cu(OH)₂ --NaOH/heat→ RCOONa + Cu₂O + H₂OBenzaldehyde does not react with Benedict/Fehling solution.
Tollens reagent test
Aldehydes reduce ammoniacal silver nitrate to metallic silver, giving a silver mirror. Ketones give a negative test.
RCHO + Ag(NH₃)₂OH → RCOONH₄ + NH₃ + H₂O + AgIodoform test
CH₃COR + I₂/NaOH → RCOONa + CHI₃ + NaI + H₂OCarboxylic acid preparation
- Hydrolysis of acyl chlorides.
- Acidic hydrolysis of nitriles.
- Reaction of carbon dioxide with Grignard reagent followed by acidic hydrolysis.
CH₃COCl + H₂O → CH₃COOH + HClR–CN + H₂O/H⁺ → RCOOH + other productsCO₂ + RMgX → RCOOMgX → RCOOH + Mg(OH)XPhysical properties of carboxylic acids
Carboxylic acids have higher boiling points than comparable alcohols, phenols, carbonyl compounds and hydrocarbons because they form strong hydrogen bonds. They can dimerize in non-hydrogen-bonding solvents.
Acidic behaviour
Carboxylic acids are stronger acids than alcohols and phenols. In aliphatic carboxylic acids, acidic strength depends on carbon chain length and type of substituent. Longer alkyl groups reduce acidity by positive inductive effect, while electronegative substituents such as halogens increase acidity by negative inductive effect.
Chemical tests of carboxylic acids
- React with alcohol in acid to form esters.
- React with sodium bicarbonate with effervescence of CO₂ gas, turning lime water milky.
- React with FeCl₃ to form buff-coloured iron(III) carboxylate.
RCOOH + R'OH ⇌ RCOOR' + H₂ORCOOH + NaHCO₃ → RCOONa + CO₂ + H₂O3RCOOH + FeCl₃ → (RCOO)₃Fe + 3HClFormation of esters from acyl chloride
Acyl chlorides react with phenols in the presence of NaOH to form esters. Acyl chlorides also react with alcohols to form esters, and with alcohol there is no need for aqueous NaOH.
RCOCl + R'OH → RCOOR' + HClStudy Guide, Scientific Constants and Unit Conversions
Added learning support
This supporting section makes the notes easier to use during calculations, revision and mobile study. It does not replace the detailed chapters or the original OCR transcript.
Useful scientific constants
- Speed of light, c = 3.00 × 10⁸ m s⁻¹
- Planck constant, h = 6.626 × 10⁻³⁴ J s
- Avogadro constant, NA = 6.022 × 10²³ mol⁻¹
- Molar gas constant, R = 8.314 J mol⁻¹ K⁻¹
Essential unit conversions
- 1 nm = 10⁻⁹ m
- 1 Å = 10⁻¹⁰ m
- 1 kJ = 1000 J
- Temperature in kelvin: K = °C + 273.15
- 1 dm³ = 1 L = 1000 cm³
Calculation method
- Write the information given in the question.
- Convert every quantity to the required unit.
- Select and write the correct formula.
- Substitute values with their units.
- Calculate carefully and state the final unit.
- Check whether the answer is scientifically reasonable.
Revision method
- Read one chapter and identify its key definitions.
- Rewrite important equations without looking.
- Attempt the question bank before opening the transcript.
- Compare related trends, reactions and tests in a table.
- Return to weak topics using the search box.
Quick unit and symbol reference
| Quantity | Common symbol | Recommended SI unit | Reminder |
|---|---|---|---|
| Wavelength | λ | metre (m) | Convert nm or Å to metres before using E = hc/λ. |
| Frequency | f or ν | second⁻¹ or hertz (Hz) | Frequency is inversely proportional to wavelength. |
| Energy | E or ΔH | joule (J) or kJ mol⁻¹ | Keep J and kJ consistent throughout a calculation. |
| Temperature | T | kelvin (K) | Thermodynamic equations normally require kelvin. |
| Amount of substance | n | mole (mol) | Use stoichiometric ratios from a balanced equation. |
On a phone, use the chapter button at the top, type a keyword in the search box, and tap a result. Long equations and wide tables can be moved sideways inside their own boxes without shifting the whole page.
Formula and Reaction Centre
Revision
Important formulae and reaction patterns appearing in the uploaded document are collected here for fast revision.
E = hfc = fλE = hc/λλ = h/mvΔxΔp ≥ h/4πM(g) → M⁺(g) + e⁻X(g) + e⁻ → X⁻(g)effective nuclear charge / covalent atomic radiusΔH = Σ BBE − Σ FBEQ = mcΔθQ = CΔθH⁺ + OH⁻ → H₂ORCOOH + R′OH ⇌ RCOOR′ + H₂OCH₃COR + I₂/NaOH → RCOONa + CHI₃CO₂ + RMgX → RCOOH after acidic hydrolysisQuestion and Example Bank
Practice
The following question/example prompts were extracted from the uploaded document OCR and grouped by page.
Page 11: question/example prompt
States that: "Matter has particle nature as well as wave nature". This means that matter have dual properties or two properties such as particle nature and wave nature. The wave particle duality nature of matter was put forward by De Broglie scientist. De Broglic's derived an expression which applied to find the De Broglie's wave length,
Page 14: question/example prompt
calculate the wavelength ofthe first line of Lyman series in the same spectrum. The uncertainty of the momentum of particle is 3.3 x 10""“ams". Find the accuracy in whic its position can be determined Question 11
Page 16: question/example prompt
Question 14 (a) (i) What do you understand by dual nature of matter? (Gi) How does de Broglie equation consider the dual nature of matter? (b) (i) Calculate and compare the energies of two radiations, one with wavelength 800nm and
Page 30: question/example prompt
Example Na” = 0.095, g?* = 0.065,AI"* = 0.050, P* = 0.212,5** = 0.184,cI” = 0.181 In period 4 the bivalent cation from Tito 2* show a d-blocks contraction similar to but larger than the corresponding contraction for atomic radius. The same i true ofthe Lanthanide contraction fo the trivalent cations ta" to Luin period 6
Page 43: question/example prompt
QUESTION ‘outline factors that enable elements to have diagonal similarities AA. similar eletronegativity B. similar atomie and ionie sizes.
Page 50: question/example prompt
Example; CaCOyey * CaO + C09) CulOH) acy > CUO + #20 2P8(NO,)ai > 2PO0 5 + 4NO zr) + Op
Page 56: question/example prompt
Example Nag + H30(y + NAOH ae) + 1/> Haig) Cag + 2Hz0cn —* Ca(OH) x09) + Haig) 2B) INDIRECT METHOD OF PREPARATION OF METAL HYDROXIDES
Page 58: question/example prompt
Example Fell + 30H) > FECOM xn nize) + 30H faq) > ZA(OH) x 4 Caustic oda (a0 used inthe manufactur fk paper and 099
Page 61: question/example prompt
Example OH jag) + NHiaqy —? Nagy + H₂O(y NaOH) + NH₂CI(aq) + NaCligg) + NHyy) + HO 5, ACTION WITH SULPHUDIOXIDE
Page 69: question/example prompt
Calculate the enthalpy change for the reaction "®2 + CO Fe + CO₂ Solution Page 1363 ot
Page 70: question/example prompt
Example 1 (a) Define (i) Bond energy. Is the energy which is obtained when one mole of covalent bond is formed or broken of an atom.
Page 71: question/example prompt
Example 2 Calculate the enthalpy of hydrogenation of ethane to ethane. Given (C=C = 612 kJ mol⁻¹
Page 76: question/example prompt
Example1 SH'F Cl(s)+2H₂ ——> CH₂ tt ra
Page 81: question/example prompt
QUESTION What is limiting reagent? Limiting reagent is the reactant compound in the neutralization reaction which have small number of moles.
Page 86: question/example prompt
Example ll NaOH(aq) i) CH₂ CCH3+ I, ———>CHI3+ CH3COONa+ H₂O
Page 90: question/example prompt
Example i] CH; C-—Cl + H₂O ———~ CH;,COOH + HCl Ethanol chloride b/ Acidic hydrolysis of Nitrile
Page 93: question/example prompt
Example o iH I o-—c —CH₂
Full OCR Source Transcript by Page
Complete source coverage
Source transcript — Page 1
GENERAL CHEMISTRY Isa branch of chemistry which deals with behaviour and characteristics of lecrons This subtopic deals with electron occupying space in an atom. The electron occurs in the orbit! shell atthe region called orbital. The orbital i the region where there isa maximum probability of locating electron. At the same time this topic deals with electron of atom which occurs in a chemical compound. The general chemistry includes the following aspects or subtopics:- + Atomie structure + Atomic spectrum H ~ spectrum, + Wave mechanics. = Chemical bonding 1.0 ATOMIC STRUCTURE, Atomic structure deals with structure and component of an atom. The first scientist discovered that ‘matter is made up of small particles called atoms. The term atom means indivisible particles. But later, different scientists put forward atomic models. These atomic models account for atomic structure, There are several atomic models which include the following:~ + Dalton’s atomic theory. + Thompson's atomic theory. + Bohr’ atomic model + Rutherford atomic model, + Wave particles duality nature of matter + Heisenberg uncertainity prineiple DALTON’S ATOMIC THEORY Dalton’s atomic theory includes the following main points i. Matter is made up of small indivisible particles called atoms. ji, Atom is neither created nor destroyed il, Atoms ofthe same elements are similar especially in mass, iv. Atoms of different elements are different especially in mass, ¥v. Atoms of different elements when combine they do so in small ratio whole numbers RECENT MODIFICATION OF DALTON’S ATOMIC THEORY Dalton’s atomic theory was modified because all points were not vali. This resulted into discover ‘of modern atomic theory. The following include point of moder atomic theory: i. Matter is made up of small indivisible particles called atoms was not valid due to the existence of three particles in atom. Matter is made up of a small divisible particle called atoms.
Source transcript — Page 2
[Particle [Nature of change [symbol [mass Position)
Source transcript — Page 3
Proton +1 Pe 1.00. Nucleus [ Neutron [get 09 Nucleus a CS i Atom is neither created nor destoyed was not valid due tthe exienc of radioactivity therfore Atom canbe eet or denroyed by ether mew fsino:uson ii Atoms of the same clement re simlr expel ih mae was Not vad ue 10 the Chistence of Soop, Atoms ofthe sume ements have ihr same or ifrent mass. iv. Atoms of clement are diferent especially in mass was not ald, Atoms of dret ‘lect have eer ceo eres ns ¥. on of diferent lemeats when consine they dos in anal to of whole ber was ot valid becuse diffent laments combine by ting varie ai of whole number HOMPSON's EXPERIMENT (DISCOVERY OF ELECTRONS) ‘Thompson's conduct an experimen! investigate ii conduts etiily. The flowing out was wed drag te experieat 4 eh +The emission tube have clsrode at cach cod which is connected othe extemal cc. The cnisston ie is connected Whe vacuum panp in eee Wo mail te Tow prsure i he ‘The circuit is switched on which resus into the allowing observatio:- +The bul mite light which indicate that he gs condut let. + Theres showing of emission tube or emission of ight «Thetis Muresenc of emision tbe «The stream of ay runing om eathoe tthe node. Trough investigation of properties of cathode rays) using magete Held eet and gol cleetoscope etl. Vind ves ino papeps en rth om
Source transcript — Page 4
discover of electron, The cathode rays were the electrons.
Source transcript — Page 5
EXPLANATION OF THOMPSON'S EXPERIMENT IN TERMS OF ATOMIC STRUCTURE Ground state: Is lowest energetic state of an atom. Isa state when an electron filled in the lowest energy level before filling the highest energy level available. The electron filled in atom in order of increasing energy level. Ths state make atom to be stable. Excited state: [sa state of an atom when electron filled in the highest energy level before filling lowest energy level available, Ifthe electron excited jumps tothe extent thatthe nuclear tractive foree act upon it result pulling back of electrons. When return back to the ground state release all amount of energy which was absorbed inform of radiation, RADIATION: This energy causes glowing of emission tube. When the radiation strikes the ‘emission tube causes florescence of emission tube. Convergent limit: Is a state of atom when an electron is removed completely from ground state to the infinite, The convergent limit occurs if atom gain high energy which result electrons to jump tothe highest energy level where the nuclear attractive force cannot act up on it. This, electron cannot return back tothe ground state it result the atom let to positively charged. The convergent limit isa factor which eauses some electrons to move from cathode to anode. ‘These ere stream of rays called cathode rays which later was electrons, SIGNIFICANCE OF CONVERGENT LIMIT. ‘These include the following:- + Itresulted into discover ofthe ionization energy. This ionization energy used in the inorganic section + Itresulted into formation of ion particles. The ionic particle is more reactive when take part during chemical reaction, +I resulted into production of rays. These rays are known as atomic spectrum. ‘THOMSON MODEL OF THE ATOM After the discovery of electrons and protons, the next question was to know how these particles fare arranged in an atom, The frst simple model of the atom was proposed by J.Thomson in 1898, The Thomson atomic model is popularly known as the Thomson's "plum-pudding” ‘model ofthe atom, Thomson considered an atom to be a sphere (radius = 10" m or 10* em) of uniform positive charge into which the negatively charged electrons were embedded. This model 1s lke plum- ‘pudding dotted with raisins
Source transcript — Page 6
a Aspere ofuntorm oor charge This model oF an atom could not explain many experimental facts. So, it was abandoned RUTHERFORD'S SCATTERING EXPERIMENT In 1911 Rutherford performed an experiment which is now known as Rutherford!’ scattering experiment. In this experiment, he bombarded a thin sheet (0.00006 em thickness) of gold with alpha a particles. The particles were obiained from a radioactive substance. The particles are doubly ionized helium atoms (He). "he sattered -partiles produced tiny ashes on striking with the ne sulphide sereen, These tiny lashes were observed with a movable microscope. Uhe experimental set up used in the famous a-scatering experiment is shown in figure below. The following observations were made from the scattering experiment. Structure of atom
Source transcript — Page 7
ac foun < Tomi ot — Pemterconpemed nara ps sit S. Nana s, SorSiaretins 5) Sone uteteumst pes The e-seatierng from metal fis The -pticles are produced by a radioactive source Since lead Abootbe a -patls a lad pat with a oles used to obtain a beam ofa patles Thea pails satered rom the mal sie the Muorescent zine sulphide) sren and produce tiny ashes. A movable microscope i sed oviw the ashes 1 Mos ofthe apres pase trough the metal i without any change in ther path Le, they remained undetected ir "Some ofthe aprile defected trough small angles. ii, Onlya few of them (1 in 10,000) were actualy dfeted by as mach as 9°, even large angles, One in 20,00 prices resumed bak sufering a defection of 180" BX nage te a , saul O © C2 ARK C) 6 REL! a. Sy 2 Download re nots and pst papers rom warwaaticom
Source transcript — Page 8
Explanation. The results ofthe scatering experiment could not be explained by the Thomson's atomic. Caleulations showed that a charge spread over a sphere of radius 10° em could deflect
Source transcript — Page 9
i. Greater than Es E> ii, Equal to Es ~ E2 ii, Less than Ex — E> iv. Greater than E)~ E but les than Es Smaller than Es E> Solution: a) 7=2930A fee a soxtetnys (ohare f= 102x107 St Eeht E=6.3x 10s x 1.02x 107 S* E=6426x 10") by Ex=-136x 10° a= -15.44x 10°) E=E: Ei E-E: E: E=(-1.36x 10°) (-5.44x 10) E=4.08x 10" at =n oe sours“ pata £=6.15x 10'S" Hence:
Source transcript — Page 10
Fee
Source transcript — Page 11
net
s0eitm/e
errors
= 4.88 10"m
Ci) Aline of wave length 20304
ii) Aline of wave length 8092 A”
iii) 12
rE
Line of 2030
Since re
Boetem/e
fa 2o00+10-m
f= 148x 108"
E=ht
E=63x 10%Isx 148x 10%
s Es 0”
D) Solution
i) Greater than Fs — Fa result transition of electron ftom F) and above Es
ii) Equal Es Es transition take place from E> to Es
{ii) Smaller than Es ~ Ez result transition of electrons from E> but cannot reach instead hang
between E> and Es
iv) Greater than Es -E: but smaller than Es E result transition of electron from E> and above
Er but cannot reach Ex
‘THE QUANTUM THEORY
WAVE PARTICLE DUALITY NATURE OF MATTER
States that: "Matter has particle nature as well as wave nature". This means that matter have dual
properties or two properties such as particle nature and wave nature. The wave particle duality
nature of matter was put forward by De Broglie scientist. De Broglic's derived an expression which
applied to find the De Broglie's wave length,
Source transcript — Page 12
De Broglie’s wavelength is in terms of mass and momentum, Hence from Einstein equation; a
Source transcript — Page 13
(i) Frequency and wavelength
Source transcript — Page 14
(i) Energy and frequency. (ii) Energy and wavelength (b) Orone (0) protects the earth’s inhabitants from the harmful effects whose wavelength is 2950 Caleulate (i) Frequency. (Gi) Energy for this UV light (6) Ifthe wavelength ofthe first line of the Balmer series in a hydrogen spectrum is 6563, calculate the wavelength ofthe first line of Lyman series in the same spectrum. The uncertainty of the momentum of particle is 3.3 x 10""“ams". Find the accuracy in whic its position can be determined Question 11 8) (i) A small object of mass 10g is thrown with velocity of 200 mis given h = 6.626 x 105. Calculate its wavelength, (Gi) Kinetic energy ofa sub — atomic particles is 5.65 x 107°, Caleulate the frequency ofthe
Source transcript — Page 15
particle wave (h = 6.626 x 10
Source transcript — Page 16
Question 14 (a) (i) What do you understand by dual nature of matter? (Gi) How does de Broglie equation consider the dual nature of matter? (b) (i) Calculate and compare the energies of two radiations, one with wavelength 800nm and the other with 400am (i) What isthe amount of radiant energy associated with atomic 6.662 x 10Is, velocity of Tight 3x 10's (6) the wavelength of a beam of light is 28 x 10°'m. Caloulate it's: (@ Wavelength in em, (i) Frequency. (ii) Energy of one ofits photons, (@) (i Referring o Boke’s atomic model, what's ionization energy? (Gi) Calculate ionization energy of hydrogen. Reydberg’s constant RH = 1,097 x 10'm" Downe oes an ps ppes om won natn
Source transcript — Page 17
(©) (i) Calculate the frequency of the 3" line of visible spectrum. (RH=1,097 x 10°m, C=3 x 10'm/s) (Gi) Given thatthe wavelength of the * line of Balmer series is 6563A. Calculate the wavelength ofthe 2 line in the spectrum, INORGANIC CHEMISTRY 'sthe chemistry of all the elements and their compounds with the exception of most carbon compounds ‘ut of which only the oxdes,cyanides and carbonates are considered as inorganic compound. inorganic ‘compound can aso be defined a the study of the elements in the periodic table. PERIODIC TABLE Periodic table s the table of all the known elements arranged in order of increasing atomic numbers “The arrangement reflects the electronics configuration ofthe elements ‘THE PERIODIC TABLE CLASSIFICATION OF THE ELEMENTS (MENDELEEV'S AND LOTHAR MEYER 1869) The fist comprehensive classification of elements was made independently by Mendeleevs in Russia
Source transcript — Page 18
and Lothar Meyer in German in 1869:They tabulated all the known elements on the basis of relative atomic mass. The arrangement of elements inthe early periodic table was according to the ordinary
Source transcript — Page 19
periodic law which tates that "The properties of elements are periodic function of thee relative atomic
When elements were arranged inorder of increasing atomic masses, elements with similar properties
recurred at regular intervalsThe recurrence or repettin of elements with similar properties of eguat
intervasin the periodic table i known as PERIODICITY.
'Mendelee’s and Lothar Meyer placed elements in horizontal rows (periods) which caused elements
with similar properties to appear in the same vertical column (group). Some element were not yet
tlscovered and hence absent that period tabe eg. Noble gases, alum germanium ete
(nthe bass of relative atomic mass three anomalies appeared the early periodic table (Ordinary
petodic table). The postion of Potassium (391), Argon (39), Cobalt (58.98), Nickel (586), Tellurium
(127.6) andiine (1269) hat be reversed to bring them nt correct placing on chemical grounds.
The str oder of relative atomic mass would have Separated the mentioned elements from closely
{elated element. For example Potassum could have been separated frm other aka metals. These
anomalies showed deat that the relative atomic mass was not realy the tue bas of arranging oF
Classifying elements inthe periodic table
‘The Uwe anomalies stated above wee de to ISOTOPE. For example bath Argo and Potassium exhibit
Isotrpy The principal lotopes of these elements are shawn inthe table below.
ELEMENTS | ISOTOPE | PROTONS| NEUTRONS | RELATIVE AT
| Istisotope | 18 18 36
2nd isotope | 18 22 40
Potassium [st isotope 20 39
2nd isotope 22 al
3rd isotope 21 40
R.A.M = (Mass of 1 x Abundance) + (Mass of 2“ x Abundance)
Inthe case of argon, the heavier topes predominatehas higher abundance) ging an
average atomic mass of 39In Potassium the lighter otope predominates giving an average atomic
Source transcript — Page 20
elements example A IA, IVA, VA, VA and VIA). The nable gas contains full outermost electrons S and P-sub shells Since ths configuration i very stable, the noble gases are uncrative. However they form some compounds with strongly electronegative elements like Oxygen and Fluorine ample of noble gases include Hellum, Neon, Argon, Krypton etc 3. d-BLOCK ELEMENTS, The d-biocks consist of elements with partially or fulfilled sub shell. They fil their electrons inthe d- sub shell ofthe penultimate shell. They use electrons from S and sub shells for bonding. xample Scandium, Manganese ron, Radium, Nickel, Cobalt, Copper, Zinc ete 4. FLOCK ELEMENT The F-block consists of elements which are called Lanthanides and Actnides. They are also known inner transition elements. These elements have two partially fille sub-shells namely (n-}d and (0-2) They al belong tl & because they ae so similar that itis very difficult to separate one from another example eg. La, U,Np,Lw, Thetc Nore; 1. The atoms of all elements of the same period have the same numberof shells which are partially or fully occupied by electrons. TL The number ofthe main groups is equal to the number of eleetrons in the outermost shell, IL, The number of period is equal to the principal quantum number (n) of the outermost shell and to the total number of electrons shell ofthe elements in a given period. PERIODIC TRENDS IN PHYSICAL PROPERTIES 1. DOWN THE GROUP 1. L The atomic size(Atomic Radius) The atomic radius ofan uncombined atom cannot be defined strictly because of the uncertain boundary of electron clouds. The distance between the nuclei of chemically oF covalently combined atoms can be measured accurately by xray ditfraction method Therefore, the atomic radius is defined as half the dstance between the nucel of two similar/ identical atoms joined bya single covalent or metalic bond. There is signficant regular increase in atomic radi among elements down the group This trends due to increase of numberof electrons and number and ‘numberof shells down the group. m2
Source transcript — Page 21
The newly added electrons or shell must be at greater stance from the nucleus than that ofthe proceeding element (ea noble gas). Aso the added electron i shielded bythe inner electrons na
Source transcript — Page 22
cleus has increased eg. Na=1.574", NA” =p.or4 ‘rucleus and as the result the size of an anion increase example 1-099” and!” =1.214° the ELEMENT [OmTCOREER ATOMIC RADIUS um) | TONTC RADIUS am) ] TON
Source transcript — Page 23
1 33 0.133 0216 '
'NB: Ionic radius i half the distance between the nuclei of two ions in an ionic eystal
Il, Ionization energy
This is the energy required to remove an electron from a gaseous atom or ln. Hence the fist ionization
energy ofan element, Mis the energy required to remove the frst electron from it.
Mog) Mig + e-
The second ionization energy isthe energy required to remove the second electron from a gaseous lon
Mj) > MZ + e7
The successive ionization energes are defined accordingly The higher this energy the tighter the
electron s bound to the atom orion. The ionization energy decreases down the group because OR due
tothe increase in atomic sie ofthe element down the group, the increase in adi downs a group
correlate with the decreasing ionization energies.
“The nuclear charge increases down the group butt is cancelled by shielding effect and screening effect
ofthe electrons of the inner shells. The two effects increases down the grOUp. Since the nuclear charge
Isaflected by the increase of electrons, the atoms become larger down the group and therefore the
outer electrons) is easly removed as itis losely bound. Thus forthe alkali metals Lito Cs, the outer
‘mast electron is most really removed for Cs whichis the largest element ingroup A. Fluorine having
‘the smallest atomic size ingroup VIA has the highest ionization energy.
IV. Electron affinity (EA)
‘The electrons affinity isthe energy change which occur when an electron is added to a gaseous atom or
ton. The non-metalc element realy gain an electron to give a negative ion.
Xgy te" XG) 4H =Ky/mot
Te energy associated with this process i termed asthe electron afity. The process may ether absorb
lor evolve energy example endothermic and exothermic respectively). Some elements evolve large
{quantities of energy Le their electron afities are large and negative. The more negative the electron
affinity, the more the electron is attracted by the nucleus. Thus the fist electron affinity i the energy
change which involve the addition ofthe fist electron to a gaseous atom
us
Source transcript — Page 24
Mate >My ‘Negative electron affinity (in| wry a | a a ci a a | a Og) +e" 0%) 4H = -148kJmol” 0%) +e 70%, AH = *850k/mol- IV, Electronegativity
Source transcript — Page 25
— [PeredSetement JF TP TP TE TFT? TE |
Source transcript — Page 26
Pommr PEP PP EP |
Source transcript — Page 27
erenceoviowaven TP PP | a dl Ml Be = 1572S?
Source transcript — Page 28
B= 15%25%2pt
Source transcript — Page 29
Be has two paired electrons in its 25 orbital. t needs energy frst to split 25 electron pair and secondly to effect the electron removal. But for B there is only one electron inthe 2P orbital which Is easy to remove asitismore distant from the nucleus ‘A comparable explanation accounts forthe break between N and O. Their electronic configurations are asfollows; N= 15%25"2p* 0 = 15%25"2P For Nitrogen theres extra stabilty due to half-filedP-sub shell. n Oxygen the 2 sub evel has. a pair of electrons which shields the “7 and 7 electrons rendering them easier to remove, hence an abnormally lower ionization energy for Onygen. We may take almost similar account fr the elements in Period 3 where there's break between Mg and Aland also between P and S. Mg = 15%25%2p835? Al = 15%25*2p*35?3pt P = 15%2572P35737? $= 15*2S*2p*3s*3pt FACTORS AFFECTING IONIZATION ENERGY 1). Enfective nuclear energy; The greater the effective nuclear charge the greater the ionization energy 2). Shielding Effect and Sereening Effect; The greater the shielding and screening effect, the less the ionization energy 3) Radius ; The greater the distance between the nucleus and the outer electrons of an atom, the less the ionization energy 4) Sub level; An electron from full or half filled sub level requires additional energy to be removed tm, 1ONIc RADH a2
Source transcript — Page 30
tonic radi ke atomic vary perioicaly with atomic number. The anions are much lager than the corresponding atoms while cations ae usually much smaller. The explanation of the trends in atomic ai applies also tothe very similar trends in tonic radi Example Na” = 0.095, g?* = 0.065,AI"* = 0.050, P* = 0.212,5** = 0.184,cI” = 0.181 In period 4 the bivalent cation from Tito 2* show a d-blocks contraction similar to but larger than the corresponding contraction for atomic radius. The same i true ofthe Lanthanide contraction fo the trivalent cations ta" to Luin period 6 IV. ELECTRONIC AFFINITY Electron affinity along the period can be dscussed in terms of non-metal and metas. tis generally ‘observed that non-metal have higher values of electrons affinities than metals Non-metals have higher values because they can realy gain an electron to give negatively charged ion. The process involving addition of electrons to neutral atom is exothermic because energy must be lost in order that the formed ions stable. Generally there i increase of electrons affinity across the group due tothe increase of electronegatvty which i result of decrease in atomic radi ofthe respective elements. Als increase of effective nuclear charge increases electron affinity V. ELECTRONEGATIVITY Electronegatvty ofthe main group elements increase across each period. Tiss due to the increase in affective nuclear charge as wel as decrease in atomic size. Therefore the halogens atom in every period has the highest electronegativity value than the rest members. Alkali are the least electronegative elements in each period VL MELTING POINT. ‘The melting point of an element i the measure ofthe amount of energy (heat) which must be supplied tobreakdown the reguar arrangement of atoms or molecule in crystal It'sa temperature at which a substance changes from solid into liquid. There are diferent types of force hich holds atoms and molecules together, example due to such variation in forces the melting point of the elements in a period do not change uniformity e.g Period 3 elements. Melting point increase sharply from Na" to Mg, Sodium atom to contribute only one electron tothe metallic crystals, but Mg contributes two electrons. This accounts for the lower Melting point of Sodium compared to Magnesium. Allhas three electrons inthe outer valence shell but contributes only two of them to the “electrons a2
Source transcript — Page 31
sea". Thsis why ithas meting point close to that of Magnesium. The thi electron is held fimly tothe eaten that isnot contribute to the “sea electrons”
Source transcript — Page 32
Siicon is non-metal with some metalic properties tik luster, electric conductivity and ability to form alloy with metals. Silicon has the highest Melting point in period 3 due tots “giant covalent structure” The slcon giant structure is comparable to that of Diamond Phosphorus and Sulphur have relatively low Melting pont because their molecules are held together by weak Van Der Waa’ forces. Sulphur has higher Melting point than Phosphorus due to the differences insizes oftheir molecuesie ®s 2°24 Ss Chlorine diatomic ands a gas at room temperature. ts melting points very low due toa very low Van Der Wal forces holding the molecules. PERIODIC TRENDS IN CHEMICAL PROPERTIES ACROSS PERIOD THREE (Na to Ar) ‘Chemical properties along the period depend on the change ofthe elements from strongly metallic to non-metal Sodium and Magnesium are strongly metalic while Aluminum is weakly metalic element. Slicon, Phosphorus, Sulphur and Chlorine ae non-metalic elements. Thus metal properties decrease acros the period from left side ofthe periodic table tothe right a) HYDRIDES “The hydrides of period 3 elements include NaH₂ Mg, Aly, SM PH₂ HS and HCI. Sodium hydride is strongly ionic while Magnes hydride sage ionic but the bonds re covalent. Aluminium yeti is covalent REACTION OF HYDRIDES WITH WATER Sodium. Magnesium, and Aluminum yields hydrogen gas and metal hydrides, they are basic in nature because they react with water to form base NaH) + Hz0q) —> NaOH aq) + Ho) Malay + HzO) — MgOH)ae) + Hag) Siicon hydride (sane) evolve hydrogen with water in alkaline medium (catalyses the reaction) . eer Sill) +Hs0(y +20Hjaq) —* SiOF- (44) + 442.9)
Source transcript — Page 33
Phosphine (Pfs non-polar covalent compound and hence doesnot reac wth water. Phosphine isa non-polar covalent compound due to small sitferenceneletronegativty values between Hydrogen and Phosphons 1 = 22and P = 21) “Te hydrides of Sulphur (HS) and Chorin (HC!) ar polar covalent compounds. They hydrolyze in water to form acid HS, + HO @ Hy 0faq) + HSiza) HCl + HzO) H503s9) + Cling) Therefore the hyaides ofthe strongly metalic elements tend to form alkaline solution with water while those of the non metas form acide solitons. b) CHLORIDES ‘The Chiories of period 3 elements include NaI, MgCl₂ AICh Sil, Pls PCh, SiC, The Sodium and Magnesium chlorides are ionic saltsThe rest ofthe chlorides are covalent ia nature. As metalic character decreases along the period ionic character of the chiovdes decreases. REACTION OF CHLORIDES WITH WATER When the ionic chloride is added to water, there isan immediate traction of polar water molecules for ions in the chiovides. The sold chloride ether dsolves to form free ions exampte N@ 2a 94 Cline) «react form new substances. “The hydrolysis of ehordes varies across the period Sodium chore is nat hyolyzd in water probability due toa large siz of Na ion leading to low poaritng power fr water molecules. The Chlorides of the rest elements have covalent characters. As metalic character decrease along the period, Toni character ofthe chides decreases as wel The extent of hydrolss of chlorides varies across the period. Magnesium chloride isnot hydrolyzed but its hydrate crystals undergo hydrolysis when heated to give hydrogen chiride and abasic Magnesium chlorides. MgCl₂.6H₂O,) > Mg(OH)Cl;,, + HCl) + SHO, ‘Aluminum chloride is easy hydrolyzed by water to produce an acidic solution. A in is very smal in size and itis highly charged. Thus its polarizing power is igh, due tots high polarizing power it forms
Source transcript — Page 34
hydrated ions (A(H:0})". The AP* in strongly plarzes the O-H bond ofthe water molecules in the [AKH:0}.P* fon tothe extent that the bonds break to release the hydrogen protons. The solvent water
Source transcript — Page 35
molecules abstract proton rom polarized water moleciles to frm the acc hyroxoniim ion Hi, The HO" is formed 8 flows Alc) +6830 ¢9 — (AIH₂ ) eI) + $C) [AIGO) eT) + H2Oco * [ALHO) SOM + Hahn (AICO), Oy + H₂Oc0 # (Al(H₂O)«(OH) Tag) + Hikes [AUCHO) 0H] + #2010 * [ALCHO)a(OHalin + HaOtae) [AUG.O), (OF) s]eg + #200 * AUHO)s 342049 + Hoe) The chloride of Silicon Phosphorus and Sulphur hydrolyses completely in water to form acidic solution or sold SiClyg + 2Hz0g > SiOrg) + 4HClee) PClsq) + 3H₂Oq) — H3POxqq) + 3HCliag) PClggy + 41,0(9 > HyPOgag) + SHClag) SaClaqy + H₂Oqy — 2HChagy + H2Sg) + H2503;09) Note: Asmetalie character decreases along the prod onic nature of the horide decrease while the entent of hyo increases ¢) THE HYOROXIDES “The hydroxides in period 3 include NaOH₂ Mg(OH},A\#)»"sio(oH),(OH)*” PO(OH },SOOM), and O,(OHLCIOM). The hydroxides fom sion to chlorine arena true hyéroxide but they are on acids Sexium and Magnsiom hysroxdes are thet hytong. They have strong tendency of releasing the (OF roup. Aluminum hydroxide is Amphatere. ‘Te aii character of non-metal hydroxides is det the tendency of leasing or donating Hon ra
Source transcript — Page 36
when dissolved in water. Silcon, Phosphorus, Sulphur and Chlorine ae electronegative enough to
Source transcript — Page 37
withdraw electron by Inductive effec from the OH bond ths, aclitating the release of hydrogen as 2 proton i. The act ofthe hydronde of, and lincreass with the increase in the electro negativty of ‘Al(OH); respective elements Solubity decrease rom NaOH to 4!(OFs que to decrease in metalic character orion character of the hydroxides across the period 4) oxioes Sostium and Magnesium are strongly metalic and the oxides are on. Aluminum oxides onc bu nt bases these sodium and magnesium The oxides of sodium and magnesium are strong bases while aluminum oxides are amphoteric. The cides ofthe remaining elements are all acid ‘ONIDES Ao, —] 5:0, PO, [50,0 7.0 |50, | cl,0, REACTION OF OXIOES WITH WATER Solubility ofthe oxdes of period 3 elements decreases along the period as metallic properties decreases. The oxides of sodium and magnesiom frm hydroxide with water or steam because of the protective fm of onde. The oxides of phosphorus sulphur and chlorine reacts with water to form ace solution. Sica (SiO) does not react with water butt’ aciaie eq N20 + HaOq) — 2NAOH aq) MgQq + H₂Oq — Mg(OH), PiOgs) + 620) —> 4HsPO3(aq) S05¢q) + H₂Ou) — H2S0s(a) Cl₂05%q) + H0(q) > 2HCO (aq)
Source transcript — Page 38
DIAGONAL RELATIONSHIP BETWEEN THE ELEMENTS The fist element in every group isthe smallest and has the highest electronegativity compared to the rest group member asa result the fist elements have properties which differ from the rest group ‘member but similar to those tthe next lower elements diagonally. The kindof relationship in which the clements whic are diagonally located in te perio’ table have similar properties i known as diagonal relationship. Diagonal relationship may aso be explained in terms of polriting power ofthe diagonal elements The polarizing power of an element is the abilty of postive fon to polarize the negative ion When positive and negative ions approach each other their shape are distorted. The extent by which the fons able to "undergo distortion i called polarizability. The effec is polarization is as follows; 'NB; Polarization ithe lstortion or deformation of an electron coud ofan anion by a cation If polarizations quite small the ionic bond results and its high the electronsin the anion are drawn towards the cation tothe extent that a covalent bond is formed The polarizability and polarving power cof an ion is affected by; i, Thesizeof the ion i, The charge on the ion Thus polarizing power i igh fora smallion which has high effective nuclear charge. On moving across period from lef to right, onic radi decreases and effective nuclear charge increases. On descending 2 ‘group ionic radi increases while the effective nuclear charge decreases. Hence the diagonal elements have similar polarising power. Due to these elements have similar properties. The diagonal relationship can be represented as follows Element uo 8 CN OF Electronegatvty 10 15 20 25 30 35 40 Element NoooMg A Si P oS a Electronegativty 09 12 «15 18 21 25 30
Source transcript — Page 39
The relationships most significant inthe following pars Land Me, Be and A, Beand ite a3
Source transcript — Page 40
LUTHIUM AND MAGNESIUM.
Lthium resembles magnesium and fers frm the other akall metals s follows
7 Both Lind Mg have small atomic and ionic | Have relatively large atomic and onic radii
radii
fi, Formionic nitrides LIN and Mg,N, when | No reaction with nitrogen gas
{ik “Form monoxide (normal oxides) on burning in | Form peroxide example Na;0, or superoxide e
sir example Li,0 and MgO a
We. Bicarbonate are known only ina solution (not _ | Solid Bicarbonates can be made (stable)
stable in a solid)
'. Hydroxides, carbonates and nitrates decompose | No similar decomposition
‘on eating into oxides example A
- aon 5 sublimes
2L10H 5 11,0 + H₂O
«ov! Na;C0,—+ No decomposition
eos 4 ort
‘Ma(OH).— MgO +H₂O (Reason; They are more stable).
yen, Soin tk) Nitrates decompose to form nitrites and oxyger
Nitrates decompose to oxides, nitrogen dioxide and | 2WaNO, + 2NaNO, +0;
oxygen
4 2KNO, + 2KNO, + 0;
ALINO, > 2L1,0 + CO₂ "
| Capen ‘are more stable)
Vi. Phosphates, carbonates, fluorides and, 70" ~ | Corresponding compound much more soluble
hydroxides only slightly soluble in water water
Vii, Halides(except fluorides)are soluble in ‘Corresponding compound are much less soluble
‘organic solvent
‘ili. Compound have covalent character example | Compounds predominantly ionic NaCl
LiCl₂ Mech i
[Eaomeie [Ra
Source transcript — Page 41
BERYLIUM AND ALUMINIUM
Source transcript — Page 42
ca ie cnet 2) eas ect wih cencetaton laces ala a Toes Hy | No waa 04 hyde complense re ‘ Bey + 206! P2H₂O + BeCOW)Fza) + Macy) quo oi? Me songs ayag Tamera egg 4 5) Oxides and prologue SS nd | One and Trion ae Wane bases) ‘eg MgO, Ca(OH), Ca0 ate Aveta Alyy) + 2NQOH ug) +3409 # 2NGAU(OH) ag) vosina'® Be0,+ 2NeOW a) + H2Oq) + N0zBe(OM aug) Asbuses eo + 2Hc1—+Becl.+H.0 M0, + 3H1C1— ale, +310 1 cores are ei hyayzed nd exist a dimers (Bec, and | NOTHIN aos example ACT, ‘AlCl the vapour state “The hydrated chloride of magnesium hydoly: << a ? Hae) + HCl ra Mac 8,04) MaLOH ng) + HCl + Dimer of ei conte e x a ui a a~ _ a Dias of Amino crite “eachenac |5) Form fluoro-complenes e.g [BeF,]*~ area
Source transcript — Page 43
QUESTION ‘outline factors that enable elements to have diagonal similarities AA. similar eletronegativity B. similar atomie and ionie sizes. C have ions with similar polarization power ANOMALOUS BEHAVIOUR OF THE FIRST ELEMENT IN A GROUP OF THE PERIODIC TABLE ‘The frst element in every group ofthe period show some properties which are not shown to other elements in the respective group The element said to show anomalous behavior when its properties itfer with those ofthe rest group member. The anomalous behavior ofthe ist element in a group is due to the folowing factors, |A. The first element in a group has the smallest atomic and ionic size when compared withthe rest group members B. The first clement in a group has the highest ionization energy C. ‘The first element in a group has the highest eletronegativity 'D. The frst clement ina group has the higher electronic affinity ANOMALOUS BEHAVIOUR OF UTHIUM 1. Lithium forms covalent compounds while other alkali metals form onic compound example 1iClis a covalence compound while NaCl is ionic 1 Lithium reacts with nitrogen gas on heating to form ionic nitride while other alkali metals do not react 6Ligg + Nagy) > LEN) IL Lithium reacts slowly with cold water while other alkali metals react vigorously IV. Lithium forms hydrated chloride while the rest group member form anhydrous chloride example LiCL2H:0 and NaCl (Li can polarize water due to high polarizing power) 'V. When burnt in air lithium gives the monoxide while other alkali metas form peroxide and super oxide
Source transcript — Page 44
Lig) + Oxy) = LE On Lithium monoxide Nagy + O3(g) > Naz0,u Soaun pee Keay + Org) > K20e) VE Lithium does ot farm acti with eye acetylene) while ote metals farm acl wit tyne HC me~ yy + Hayy NaC” mC“Nat + yy N= €#C~ My) +L 5 No reaction VIL Lithium is only alkali metal whose salts may undergo hydrolysis Lely) +4049 + LOM + HCl NaC +H0qy— No reaction Vill. he hydroxides of ihm decomposes on Retin to monoxide and water wile svar afeoralkal meats tbe unscoraponed Lory Usp + #0 NeOtyy i subtme undecomposed 1X. Lithium nitrate decomposes on heating in Lithium monoxide, nivogen dioxide and oxygen whic henuiceafeterakalimeas decompose Init an —_ LINO y 4) 5 Ltz0(q) + 4NOxig) + Org)
Source transcript — Page 45
NaNOyiy > NaNO x) + Ox KNO0y) > KNO x9 + Orc X. Lithium carbonate decomposes gently heating into monoxide and carbon dioxide while the carbonates of othe alkali metals are stable They decompose at higher temperature eg, HiC Px) 9 L0%y + CO) NasCOxn sige NAO + COrc) XL Lithium hydroxide is less soluble in water and hence « much weak base than sodium hydroxide a and potassium hydroxide XIl, Lithium chloride is dliquescent while chloride at he rest group members arent detiquescent XII, Lithium sulphate do not form alums while the sulphate ofthe rst group form alums ANOMALOUS BEHAVIOUR OF BERVLIUM 1. Beryllium react with concentrated solution of eal to form hydroxo-complexes and hydrogen gas while other alkaline eath metal do not react tog, Bey + NaOH ag +240) + NABECOH yap + Hayy Cai) + NAOH aH.) + No reaction 2. The oxides and hydroxides of beryllium are amphoteric while those of other alkane earth imetals are base 3. Beryllium chlorides hydrolyze in water while the chlorides of the rest group members do not BeCls + Hs0 + Be(OH)>+2HCI (ydroysis) 137 Download fee nates and ast sors rom wormnaretincom
Source transcript — Page 46
MgCl₂ + H₂O — No reaction 4. Beryllium chloride dimerize in vapour state while the chloride of the rest group member do not dimerize. a. a a * > * ot cl Beryllium chloride Dimer 5. Beryllium form fuoro-complexes while other alkali earth metals do not 6. The chloride of beryllium readily dissolved in organic solvents while the chlorides of other alkali earth metals do not readily dissolved in organic solvents, 7. Beryllium do not react with water or steam while other group members can react with either cold or boiling water or steam. 8. Beryllium oxide do not react with water while the oxide of the rest group members react ‘with water to form hydroxide, CaO + H₂O — Ca(OH) x09) +, Beryllium do not react with either dilute or concentrated nitie acid “#¥ 0S) white the rest group member react with both dilute and concentrated "NOs 10, Beryllium carbide hydrotyses in water to form methane while the carbides of other group members give ethyne BesCiy + H₂Oq) > Bey +CHyg) _(C* Oxidation state, CaCip)+2H:O pag > CalOH) + H-C=C-H ((C=C)* Oxidation state)
Source transcript — Page 47
11, Berylium chloride fumes in moist air while chloride of the rest group members do not. BeClaeg + Haq) > BeCOH) acy + HCl) (From air) The fumes are due to hydrolysis of 8¢C1> in water where MC! is given out ANOMALOUS BEHAVIOUR OF FLUORINE Uke other Fist elements in every group fluorine exhibit some properties which cffer withthe rst group members “The anomalous behavior of fuorine is due to; 4) Its smaller atomic and ionic size ii) Absence of d-orbital il) Is highest clectronegativity value i) Itshigher electron affinity “The Anomalous behaviors of flusrine area follows |. Fluorine is monovalent while other halogens show covalencics of 3 and 5. Chlorine and Iodine also show a valence of 7. Fluorine is a monovalent because it has no orbital while other members have d-orbital 2. The elements inthe periodic table show their highest oxidation states when combined with ‘uorine, example "and SF. This is due to highest electroncgativity value of fluorine 3. Fluorine forms hydrogen fluoride molecules which are strongly hydrogen bonded Te hydrides ofthe rest halogens do not form hydrogen bonds between their molecules H-F__----—H- Fo H-F
Source transcript — Page 48
4. The solubility of aries olen difer markedly from the solubilities of other halides of the same metal, example the allaline earth metal halides are very soluble in water exept the Tiondes which are nsluble On the ther hand siver ord sth only soluble stve aie The Murids of ahalne car meal have higher late energies than hydration energies 5, Metals show teirhighest degree of onic character when combined wth fuorne example AIF, and 5% ar onc but AI and 5 are covalent compound 6, Hydrogen Moore form aii salts contaning the bifluride om (HF), The lide of est halogens form pormal salts only, example N@#F; (Actdte salt), NaCLNaBY.KT oy. 7, Fuorne is the ony halogen more cletronegaivity than oxygen and it oen behaves dierent to ther balogens in reaction wih oxygen cooaining compounds example water F Gisplaces O fom water unlike oes). HuorineHberaes oxygen fom water whl other halozens donot 2,0 + 2F, 74H? + 4F- +0, or L042, AHP + 0, 0 + Cl₂ H+ C1" + HoCt oe AO#Cls + Clay + HOC 8. Fluorine evolve oxygen from hot concentted alkalis while other halogens form chloride and chlorate (v) B+ 40Nag SAP +0,4285,0 Cly-+ 60H age) > Cling) + ClO5ing) + 3H₂O(ae) (Ctiorate ion) Clg + Naty NaC NeCtO, +31,0 With cold ite alalisforne given afore and diuorine monoxide while chlorine foam chloride and hypochlorite, Fy $20Hiy) 7 2Fzg) + HO +H₂O 140 Download re nots an pst apes rom wa. warainu.com
Source transcript — Page 49
(Dittuorine monoxide) Clz+ 20H;jxg) > Cling) + C10~ + 420 (Hypochlorite ion) Clz+ NaOH — NaChigg) + NACIOgq) + HzO 9. Fluorine combines directly with carbon while other halogens have no effect on it SELECTED COMPOUNDS OF METALS. (Le COMPOUNDS OF Na, Mg, Ca, Al, Fe, Zn, Cu AND Pb) METAL OXIDES Definition; An oxide is binary compound made up of oxygen and other elements, example MgO, PbO, ALOs, 0x, NO», S02 ete ‘Therefore metal oxides are binary compounds made up of oxygen and metal, example PbO, FeO, sete NOTE: The binary oxygen — fluorine compounds are not called oxides of fluorine, but are called fluorides of oxygen since Muorine is more electronegative than oxygen (example OF oxygen dilluorine) GENERAL METHODS IN PREPARATION OF METAL OXIDES. “There are two methods of preparing metal oxides ) DIRECT METHOD by INDIRECT METHOD A. DIRECT METHOD OF PREPARATION OF METAL OXIDES In this method a metal reacts with a reagent or oxygen ora to give metallic oxide 1) A metal oxide may be prepared by burning a metal in air or oxygen 2M gp + Og) > 2MIO% $Wa¢9 + Oxy, > 200.) 4K + Ong) 7 2420)
Source transcript — Page 50
11) Ametal oxide may be prepared by passing steam on red heat metal 3Feqy) + 40g) > Fes Oxy) + 4Haig0 1M} A meal oxide may be prepared by reacting. a metal with an oxidizing agent ike HNOs Sm) + Cone HNO yg) —* SNOxy + 4NO x) + 2200 B. INDIRECT METHOD OF PREPARATION OF METAL OXIDES, Tn this method, the metal oxide is obtained by eating carbonates, hydroxides and nitrates ete Example; CaCOyey * CaO + C09) CulOH) acy > CUO + #20 2P8(NO,)ai > 2PO0 5 + 4NO zr) + Op ALz(SO4)s¢4) > Al2Ox¢a) + 3505¢9) F050, THO) > FeO¢n + 50x) + THO MgCOyey > May + COxe) TYPES OF METALLIC OXIDE The metal oxides may be classified as flows: 1) BASIC OXIDE 2) ACIDIC OXIDES 3) AMPHOTERIC OXIDES, 4) PEROXIDES
Source transcript — Page 51
5) SUPEROXIDE (6) MIXED OXIDES 1. BASIC OMDES ‘These are oxides which react wih acids to form salt and water nly. They also combine with acidic oxides to form salts. Basic oxides may be tonic or covalent CuO (a) + HzSOy(aq) > CUSO gag) + Hz) FeO (4) + HzS0uaq) — FeSOyagy + H2%) Ma0 y+ HCligg > MoClag) + #200 Ca ¢y + S10) + CASIO 5) Naj0) + COxgy —* NasCOyy PbO + 504) PbS gy Al,Oyy) + 6HClag) —* 2AICly(ag) + 340) 2. ACIDIC OXIDE ‘Acidic oxide are formed by metas in ther higher oxidation sates, sample CFOs MBO, S80, FeO, ete These oxides are generally covalent in nature, They dissolve in wate to form oxy-acids and hence are called acid anhydrides. ‘Sn, +10 —+ HySn0,,(Stannic acid) Cr0,+ HO —+ Cr0, (Chromic acid) ‘Mn,0, + H₂O —+ 2HMnO, (Permanganic acid) 143 Download fee nates and ast sss rom wormnaretincom
Source transcript — Page 52
3. AMPHOTERIC OXIDE
“These are oxides with both basic and acidie properties, They react with both acids and bases,
Amphoteric oxides include Zn0, AlOs, BeO, PbO, SnO:,CrOs,
Fe,0,,Mn0, ete
{) AS BASES: They react with acids to form salt and water only
PbO») + 2HCligg) > PBClayaq) + H₂O(0)
AL;Oyi4) + 6HClcgq) > AlCl 99) + 34200)
Cr, Oa¢q) + HzSOgaq) — C¥e(SO) (aq) + 342%
ZnO, + HzSOxaq) — 20S Oya + #209
fi) AS ACIDIC OXIDES: ‘These react with bases to form salt and water
‘S10 zi) + 2NGDH aq) — NazSnO gag) + H₂O¢0
Sodium metastannate
PbO jp) + 2NGOH; gq) > NagPBO xing) + HO)
ZnO) + 2NGOH₂gq) + NazZnO sug) + H2 0)
Al;O4iq) + 2NGOH aq) > 2NGAIO 3.05) + HO)
Fe:0y4) + 2NGOH gq) + 2NGFeOsiug) + H₂O()
‘Sodium ferrite
4, PEROXIDES
Peroxides are compounds containing the peroxide fon Na:Oz Peroxides of alkali metals and
alkaline earth metals can be prepared,
8) By heating the metal in the presence of excess oxygen or ait
2Na+ Oscescen) > Na;
Source transcript — Page 53
'b) By heating the monoxides ofthe metal alone or in the presence of oxygen/air. 2Na,0 > Na,0; + 2Naig) 2Ba0 + 0; ~~» 2Ba0; ©) By the action of oxygen or air on the metal dissolved in liquid ammonia, This method is for the preparation of K202, RbaOe and C302 44) By the action of H:O: on metallic salt solution in the presence ofan alkali. BaCl₂ + H₂O; + 2KOH + BaO, + KCI + 2H₂O PROPERTIES OF PEROXIDES ‘+ Stability of peroxides increases with increasing ofthe electropositive character ofthe metal ‘+ Peroxides are more stable in ry state than when they are in solution form ‘+ Many peroxides are hight hydrated due to hydrogen bonding, ‘example Ns,0; 8,0, C30: 8H:0, 88052440 ete ‘+ They alssolved in water to form alkaline solution and hydrogen peroxide Na,0, +2H₂O —+ 2NaOH + H₂O, (ce-cold water) ‘+ When treated with diste mineral acids peroxides give H:0: NazOz¢9) + 2HClaq) > 2NAC lag) + H₂O2(00) BaQ4y) + H2S0 aq) — BASO ys) + H₂Oz(0g) ‘+ Peroxide give 0; on heating and hence act as oxidizing agents Na,0, +2Cr(OH); + 2Na,CrO, + 2NaOH + 2H₂O NB: PbO» is not peroxide since this oxides does not give water when treated with mineral acids
Source transcript — Page 54
5, suPeRonoes
These oxides of metas containing the on the know superoxide ae these of potassium
(KOs, Riu (RHO: and Cacia (3:03
Preparation
M+0,5M0, (N= K,Rbor C3)
Sproides of KR, and Can be rear by burning te metal in exces nye Fir
PROPERTIES OF SUPEROXIDES,
+ They are ylow sos
+ Thestailty of these superoxide inthe order KO: 01
Theyaestongonding opens
{There hyrted by water forming iO and nen
Ko, +0 —+2K0H + #0, + 0,
oily
205 + 28,0 —+ 2017 + 1,0, +0,
Sere ae paramagetc laste otha presen one peed earn nn
6. MixeD ones
These re oxides composed of two simple oxides. The wo simple oxides may be ofthe same
Intl or diferent metal ndifeem onan sates, example Red ead (PhyO.) is combination
OF 20 and: Duetothis can be writen oily
‘Also magnate (F209 isa combination of FeO and FeO
The mined ones with dierent metal ar allows
Magnesium ferrite (MgFexO4) MgOFe";03
‘ZnFexOs nOFex**Os (Zine ferrite)
Prorenries
148d rout dot soa om acai conn
Source transcript — Page 55
+ Miblatetaes cheney atewne ser cet ofa mono h0) sdead asta io far tong mensch cto on wamey poe 2PbO.PbO,,, + 4HNOx <q) — 2PD(NO3) (09) + PbOx,) + 2H₂On, USES; Reeds ed pigment nips FRRNOUS-FEIDO ONDE Fex0d FeO. ‘FexOs occurs naturally as Magnetite. It may be prepared by heating iron with oxygen or steam Pabatigiag 5 Peps 6 rnorenies ~The compounds ack incl -Var sol faromapcti the compounds inactive chemically - Reo with acids sdb oxen min of eos and feiss in sluton Fe30y5) + 6H ing) — Fefzq) + 2Fe fey) + 44200, Tes ar compounds of mth which cons hyo fons (OH he cat ncaincly rgd an cample NaOH₂ MgO ZAHM POH PREPARATION OF METAL HYDROXIDES Thee re two mato of eparion of metal yids A) DIRECT METHOD OF PREPARATION OF METAL HYDROXIDES The ysis which cane prepare by his math ae hse compose of stony evoostne meals sample OH₂ NaOH and CaOtts
Source transcript — Page 56
Example Nag + H30(y + NAOH ae) + 1/> Haig) Cag + 2Hz0cn —* Ca(OH) x09) + Haig) 2B) INDIRECT METHOD OF PREPARATION OF METAL HYDROXIDES In this method the metal hydroxide is prepared by 4) The action of water onthe metal oxide; example Nay + H₂O(y + NaOH aq) + 1/2 Hag) a) +230 (9 > Ca(OH) 0g) + Hac Ba0(.) + Hz0() > Ba(OH)x¢oq) [Nis the metal hydroxides which are prepared by action of water on metal oxides are soluble in water +) Action of calcium hydroxides (milk of lie) on a solution of carbonate, example preparation Of NaOH and KOH. These metal hydroxides are prepared by precipitation the unwanted ions and layering a solution ofthe ala, For instance when poessium carbonates and (Ca(OH) solution are mixed andthe allowed to ete a solution of potasium hydroxides. may be decanted Ca(OH) aq) + K2COs(04) 4 CACO sg —e) + 2KOH a4) ©) Precipitation of a metal hydroxide by adding ammonia solution or sodium hydroxide Solution toa solution of sal ofthe metal AICL, + NaO Hag) + AI(OH) + 2a ag) AlClyag) + 3NH OH gq) + AICOH) yy) +3NH₂ Clog) FeSO qiaq) + NaOH gq) —> Fe(OH) 4) + N43S0 04) 148 Download fee nates and ast soos rom wornnaretincom
Source transcript — Page 57
CuClaigg) + 2NHjOH gq) > Cu(OH) arp) + 2NHCleag) ‘Pb(NOs) zag) + 2NAOH oq) — Pb(OH)ais) + 2NANOsag) 4) Electrolysis of a solution ofthe metal chloride, example preparation of NaOH. Alkali metal chlorides form conducting solutions and since these metals are highly in the electrochemical series, their ions remain in solutions during electrolysis and hydrogen evolved at the cathode, Preferential discharge of chlorides ions enable hydroxyl ions formed by ionization ofthe water to accumulates inthe solution. As a result dilute solution of | the metal hydroxide is produced PROPERTIES OF METAL HYDROXIDES OF THE SELECTED METALS 1, ALKALI METAL HYDROXIDES (MOH) PHYSICAL PROPERTIES The hydroxides of group IA metals are white crystalline solids They melt at moderate temperature without decomposition except (10H) They are deliquescent solids They are very soluble in water (Joem alkali. solutions) CHEMICALS PROPERTIES ~The basic strength ofthe alkali inreases down the group, example calcium isthe strongest base -When cold and dilute alkali’s reacts with chlorine to form metal chloride and hydrochlorite 2NaOH eq) + Clzyg) > NaCl+ NaClO +H₂O -When hot and concentrated alkali’s react with chlorine to form metal chloride and chlorate (¥) NaOH aq) + 3Clazp) + SNACleag) + NACIOs( a9) + 3420) KOH (oq) + 3Clayg) > SKCl;a9) + KC1Os(09) + 320
Source transcript — Page 58
Inthe two reactions chlorine undergoes disproportion Most NaOH and KOH absorbs CO> fom the ar whereby a metal carbonates is formed NaOH + C09) —* NasCOyy + HO, = The hydroxides of Group IA metal reacts with acids to form salts and water only, example undergo neutralization reaction KOH aq) + HNO sag) — KNOs(ag) + H₂O(0 USES OF HYDRONIDES OF Na AND K 1. Owning tothe highly bask charactr aa metal hyroxdes ar used to absorb aii ese, fxampie CO; 2. tat metal hyoxdes ae wed in neirzation ection Fxample Hlag) + OH(a9) > HQ, 3. Akal metal hyvonides are usedn precitation reaction Example Fell + 30H) > FECOM xn nize) + 30H faq) > ZA(OH) x 4 Caustic oda (a0 used inthe manufactur fk paper and 099 5 Custc potash KOH) s used to manufacture sot soaps 2. ALKALINE EARTH METAL HYDROXIDES (M(OH):, PHYSICAL PROPERTIES, = They are white eryline solids 150 Download fee nates and ast sors rom wormnaretin.com
Source transcript — Page 59
Solubilities increases considerably down the group from beryllium hydroxides (Be) to barium hydroxides (Ba). Beryllium hydroxide is insoluble in water. Solubility of calcium hydroxide dereases with ris in temperature, the others increase, ‘magnesium slightly but strontium and barium hydroxide really. increase in solubility down the group is due to the fact that atice energy decreases faster than hydration energy (BeQ) is essentially covalent because ofthe high polarizing effect ofthe small ~ Group IIA hydroxides are much less soluble Na Hag) + HzS0 gag) > NA:S0yaq) + #209 The hydroxides of Na and K precipitates some metals from their soluble salts (example, “Aqueous solutions oftheir sls) as hydroxides Fefiq) + 20H(aq) — Fe(OH) x4) Cu) + 20H29) + Cu(OH) ca) Pic) + 20H jeg) > PO(OH) xg) Pref) + Oia) — Fe(OH) x00) - Hoth NaOH and KOH iberates ammonia gas when added to ammonium salts Ot) + Nig) —* NH) + Hy NaOtegg)+ NH Cli > NaCliag) + NHyey + HO REACTION WITH AMPHOTERIC METALS “Zine, Aluminium, Lead and Tin react with hydroxides of sodium and potassium to form complexes, example aluminate, plumbate, zncate and sturmmate. Aly + 2OH;zq) + 61,0, —> 2[AI(OH) Vag) + 349) Alumiate ion Zn) + 20Heg) + 2H₂Oqy — [Zn(OH) lize + Ha)
Source transcript — Page 60
Zincate ion Phy) + 2OH;aq) + 2H₂Ocy — [PH(OH)a]fc—) + Hace) Plumbate ion REACTION WITH CARBONDIOXIDE, When COs is bubbled through aqueous solutions of the NAOH and KOH the carbonates are formed, With excess ofthe COs the hydrogen carbonates are formed, NaOH gq) + COsiq) + NQ;COspaq) + H2) NagCO 0g) + COz¢9) + HzO — NAHCO x09) Cf group IA clements due tothe decrease in metallic character ofthe elements (example Group 1A elements are more eleetropositive than their corresponding Group ILA elements). Also the decrease in solubility may be due to decrease ionie characte ofthe hydroxides from Group 1A to Group ILA, NB; A Suspension of slaked lime(caleium hydroxide) in water is called Milk of lime (CHEMICAL PROPERTIES, 1. ACTION WITH ACIDS AND ALKALIS ‘+ _Berylium hydroxide is amphoteric. reacts with excess sodium hydroxide forming a solution of sodium berylate Be(OH) sag) + 2N@OH (aq) > Na;Be(H) 00) Sodium beryllate The other hydroxide of group ITA metals do not react with alkalis but react with acids to form salt and water only Ca(OH) x¢0q) + HCliaq) > CaClacag) + H2%) M9(OH)acaq) + 2HNOs(0q) — MG(NOs)iaq) + 22% 2. ACTIONS WITH CARBON DIOXIDE
Source transcript — Page 61
4+ Moist hydroxides absorb CO rom aie forming carbonates Ca(OH) x) + COxg) + CACO sag) + H2M%0 = When is bubbled through lime water (Ca(OH):) white precipitate of CaCOs are formed. This causes the lime water to turn milky. The milky colour disappears when excess CO>in bubbled through it. The milky colour disappears because calcium carbonates is converted into caleium hydrogen carbonate which is soluble in water Ca(OH) acag) + COxg) —* CACO aq) + 200 (Clean solution White precipitate (milky) CaCOy0¢) + COaig) + HO) + CALHCO₂) 509) (Milky) (Fx) Clear solution 3. ACTION OF HEAT The temperature at which the hydroxides begin to decompose increases down the group from about 300°C for beryllium hydroxide and magnesium hydroxide to about 700°C for barium hydroxide Frample M(OH) acy > MO + HO Ma(OH) sq) > MOO + HO 4, ACTION WITH AMMONIUM SALTS All the hydroxides except Be(OH)> react with aqueous ammonium salts o give ammonia gas. The ammonia gas is easily identified because it turn alkaline to litmus paper. Example OH jag) + NHiaqy —? Nagy + H₂O(y NaOH) + NH₂CI(aq) + NaCligg) + NHyy) + HO 5, ACTION WITH SULPHUDIOXIDE
Source transcript — Page 62
Sulphur dioxide tur ime water milky due ocaleium sulphite formed. When excess SO₂is added the milky colour disappears (example, clear solution is formed), The milky colour disappears due to the formation of calcium bsulphite which i soluble in wate. calorslagsois) —e casouis) + 1:00) (Clears) Wate ppt mk esour uses 1. Ue water is vied totes for carbon dioxide 2. Asuspenson of Magnesium hydrosde in water (nik of magnesium used as an ant ci 3. Ca(OH) isused in mating bulders mortar mistre of sakes ime, sand and water). 4. Amisture of Ca(OH) is used n making bleaching powder. 5. Ca(OH): Isused for neutraizng acim the so 6.Amiture CalOH) and water ite wash isused for coating walls and cel, 7. Ca(OH): used in water softening. Mg(HCO3)a(aq) + Ca(OH)a(aq) + CaCO3(s) + MgCO; + 2H2,0 8. Ca(OH) suse in sugar refoing tered ORGANIC CHEMISTRY 1 [ALIPHATIC HYDROCARBONS:
Source transcript — Page 63
Iniong chain, a stable carbocation will be formed when the carbon fs hounded by many alkyl groups (since the alky group wil be supply eletrons (CHy-CH=CH-CH3-CHs+IH——* CH; CH: CH CH CH | | | : Supplies less electron Supp more electron 3-iodo pentane Note: Hydrogen s added to the more stable carbon 2. Hydration of alkenes: Hydration means adstion of water. = This is addition of water in the presence of mineral acids. The most prefered acid is cone 1:80. The mixture should be heated in order to form alcoho. CH₂ CH=CH₂+oH₂ “““%» — cH.cHCH₂ 5 Lt0H₂ sees oH Carbocation willbe formed in CH Home Work: ‘Anti -markovnikov's rule (organic peroxide HB. In 1933 the American chemist M.S. Kharasch discovered thatthe addition of Hr to unsymmetrical alkenes in the presence of organic peroxide (RO =0-R) takes a course opposite to that suggested by Markovnikovs rule Ee Peroxide CH CH3 CH3 Br(anti—~ Markovnikov's product) CH CH = CH + HBr Br No peroxideCHs ck CH (_— Markovnikovsproduct)
Source transcript — Page 64
Nore: Its striety works using HBr with organic peroxide. ‘Mechanism: 1, Peroxide dissociates to give alkoxy free radicals, a R-O-O-R > 2R-O 2. Alkcony fee radical combines with HBr to give bromine atom (a free radical). R-O+HBr —__» R-OH+Br 3. The Bromine atom attacks propane to give a primary fee radical anda secondary fre radical Br | Br+CH₂CH=CH₂ ————*CH₂ CHCH₂ _(less stable 1" free radical) Br+CH₂CH=CH₂ ———*CH₂CHCH₂ (2 free radical more stable) 4. The more stable 2° free radical attacks the HBr molecule to form anti ~_markynikov product and bromine atom, CH₂ CHCH₂Br HBr = ———* CH₂ CH₂ CH₂ Br+ Br Bromopropane) Weeki Test: 1. (0) Naw + 3H) 7 2NHsw) Given 3°41, =°92K Since Hryou form imole he Wee
Source transcript — Page 65
CHS CHs CHsCH=C-CHs+HBr "cH; GH CH CHs Br =i He => =22 ma He =- 46K Jmol 3. (a)(ii) CaC2 + 2H₂O —————* CH;COOH + Ca Br reste os ca! CHs C= CH-CHs + HBr “""S cHs CH CH CHs CH CH 3. Halogenation addition of halogens to alkenes = This reaction is best carried out by simply mixing halogens inthe inert solvents such as carbon tetrachloride (CCL) o£ R-CH=CH-R+X, “$3 R-CH-CH-R
Source transcript — Page 66
oO v H’-0-S-0-H I ° cole Eg. CH CH=CH₂ + Cone Hz S04 —* CH CH-CH OSOsH 2- Propylhydrogensulphate CH₂ (HCH₂ +H₂O + CH; CH CH; +H₂ SO₂ OSO3H OH ‘7 Oxidation reactions of Alkenes Alkenes react with oxidizing agent to form diols. Oxidizing agent can be cither KMnOx, KaCr0x. = With cold dilute KMnOs or cold alkalineK MnOx you form diols. OH OH wnnor | R-CH=CH-R ——““— R-CH-CH-R Diol NOTE: Dio! means two OH
Source transcript — Page 67
cH=cn HS i b= CH; ———> CH)=CH) fart Of OH Ethylene glycol 411 atmo OH CH; CH=CH-CH; ————>+ CH; CH- CH CH; it OH OH (0) When hot concentrated accified MnO, or K:C1.0sis used. lkenes are oxidized to carboxylic acid or ccied to ketones or both R-CH=CHR @@%*, R_C_OH+R-C-OH + Itis broken down to carboxylic acid i i 2g CH₂CH₂-cHcH₂ cH₂ !°2"'s cH₂ C-oH+CH₂ cH₂C-O8 i ramon ees 00/5 CH₂ COOH + CH₂ C- CH₂ CH Note: HY double bonds branched, you cant form carbonyl acd
Source transcript — Page 68
ca,cxt,cxt= cus, 2 cu, cx,c00H +C0,+H₂O ‘asl, ecompores to CO₂ and H₂O OZONOLYSIS (0;)Oz0N0 ~ ozone tysis. > Breaking This isa leaage or breaking eon, aon double and by sing one «Iosomyis C=C a compet keno pod acy or eons obo depenting oa che prary str aos wom: Corals the best method of cat the poston doe bond inuaown ae ‘he onyeratedcaron In cron| compound cand by conoh isthe oe hat were hed by dou bonds te oral ees. ronayshas2 mar steps: sep Dowload ree notes ad pat papers tom waw.wazaeiom
Source transcript — Page 69
Calculate the enthalpy change for the reaction "®2 + CO Fe + CO₂
Solution
Page
1363 ot
Required manpuation KJ mot
4/) (Fe,0, +3CO ——+ 2Fe + 3C0, -28)
1/, 2Fe, 0, + CO₂ ——+3Fe,0,+CO 59
1/y(3Feo+ C0.) —+ e040 -38,
4/,Fe,0,+3/co ——+ Fe+3/,c0, 14
1/, Fe,0,+ 1/,C0; — 1/,Fe,0,+ Veco 983
Feo+4/3co,—+ 1/3 Fe,0,+1/,c0 - 1267
Feo+CO —~+ Fe+ C0, ~ 1684
{The enthalpy change is 16.84K}mol"*
2. CALCULATION OF ENTHALPIES
[BASED ON BOND ENERGIES
BOND ENERGIES
's the energy change which obtained when one mole covalent bonis formed or broken ofan atom
Any rection involves bond breaking and bon formation Reactant bonds are normaly broken while
roduts bonds reformed.
‘Since the bonds energies are known then “““of the reaction can be calculated as the difference
between broken bond energies and formed bond energies
Source transcript — Page 70
SH. ppe-FB.e Page Where by;- | 364 4H Is the heat change of reaction. B.B.E is the broken bond energies. F.B.E is the formed bond energies. Example 1 (a) Define (i) Bond energy. Is the energy which is obtained when one mole of covalent bond is formed or broken of an atom. (ii) Enthalpy of neutralization. Is the heat given out when one mole of water is formed from the reaction between acid and base at standard state. (b) Calculate the heat of formation of ethane given that: C-H = 413 kJ mol⁻¹ H —H = 436 kJ mol⁻¹ Solution Required equation SH'F C+2H₂ ———>CH₂ i. c+2(@#-H)——-H ~ C —-H H
Source transcript — Page 71
Broken bond energies = 2(H —H) Page | 365 = 2X 436 = 872 kJ mol* =4(C-H) = 4X 413 = 1652 kJ mol* AH°F = BBE — FBE = 872 — 1652 = -780 kJ mol* « The heat of fprmation of methane — 780kJ mol⁻¹ Example 2 Calculate the enthalpy of hydrogenation of ethane to ethane. Given (C=C = 612 kJ mol⁻¹ (ii)C-—H = 416 kJ mol (iii) H- HH) = 436 kJ mol (iv) C—C = 348 kJ mol
Source transcript — Page 72
Solution A, H H Page ; a +H₂—— thn | 366 H H ” HA B.B.E F.B.E = 4(C —H) 6(C — H) =4x 416 =6x 416 = 1664 = 2496 c-Cc = (H —H)= 348 =348 = 436 Total FBE = 2496 = (C=C) 348+ miele = 2844 Total BBE = 436 612 + 1664 =2712 AH. pee — Fee = 2712-2844 <1 = -137-kJ mol
Source transcript — Page 73
xamplea Poae ws Download fe ote ad pat papers rom wan. wazalmcom
Source transcript — Page 74
= 2al (2) + 3Cl; (g) —— Al; Cl₂ fe |e 2Al(g) 6Cl(g) +2 El Eaff LE i +38 24l** +6CI~ o AHF = Es + Ei + Eat + Ear + Ex From the data, 2Al(s) +6HCI(aq) —> 2AlCl₂+ 3H₂ — 1033kJ mol* H₂(g) + Cl₂(g) ——> 2HCl(g) — 184 kJ mol⁻¹ HCl +aq ——> HCl+aq —724 kJ mol⁻¹ AlCl₂ +aq ——> 2AlCl; — 643 kJ mol Data manipulation 2Al(s) +6HCI°C99) —— 2AlCI3 + 3H₂ —1003kJ mol~* 3H₂(g) + 3Cl₂(g) ——— 6HCI(g) —552 kJ mol⁻¹ —2 2aIcl3. —— AlCl₂ + aq 643 kJ mol 6HCI(g) +aq ——> 6HCI(aq) — 4344 kJ mol⁻¹ Req eqn. 2Al(s) + 3Cl₂(g) ——Al, Cl₂ — 5256kJ mol CALCULATIONS OF ENTHALPIES BY USING ATOMIZATION DATA
Source transcript — Page 75
Ding the reacton restart ae stomizton (changed atoms) whe he product energy. Calelte frombond ener. Downlosd re nots and past apes rom war wataeicom
Source transcript — Page 76
= AH of reaction = Eat-F.B.E Example1 SH'F Cl(s)+2H₂ ——> CH₂ tt ra AH°F = Eatof C+EatofH) — FBE I But. FBE= H — | - H- = 4(C-H) H Example 2 Calculate the following of formation of CH₂ given that, Enthalpy of atomization of carbon = 715 kJ mol = “1 Enthalpy of atomization of hydrogen _ 218 kJ mol C —C = 348 kJ mol⁻¹ C —H = 416 kJ mol⁻¹ H —H = 436 kJ mol⁻¹
Source transcript — Page 77
saan ane al Clg) 4H Eat =715 + 4(128) = -77K}mot⁻¹ we sito Eat = 2(715) + 6(218) soe
Source transcript — Page 78
2730 — (2496 + 348) = -144kJ mol cuales hydrogen atom. if the heat of formation of methane is. TIKI yen) that, C—H = 416 kJ mol* nee c+2u, “cn, -77 = 715 + 4X — 4(416)
Source transcript — Page 79
Scarronce rene rr cxomseemt Pecan or Ror mR eanon EY SommRY none Ca(OH) , + H₂50, —+ CaSO₂ +H₂O Pw * Pratt solution 1 =" . 396
Source transcript — Page 80
= m _m vol «. Mass in(g) = volume in cm® Quantity of that in this method can be calculate by using heat capacity ( C )and by using specific heat capacity (c). Let the quantity of heat be Q. By using heat capacity Q=CAe C= heat capacity. By using specific heat capacity. Q=mc Aé Where by AQig change in temperature. c= specific heat capacity. If quantity of heat calculated is the same and 465 also the same, then the relationship between c and C can be, Q, =CAd Q, =mcA@ Qi = Q cae _ meae Ao Ae Cc =mc Enthalpy of neutralization is calculate with respect to the number of moles of water producer. Reaction.
Source transcript — Page 81
= H+0H — > H₂O But number of moles of water depends on the moles of limiting reagent QUESTION What is limiting reagent? Limiting reagent is the reactant compound in the neutralization reaction which have small number of moles. Example 1 250c”” of NaOH of 0.4M were added to 250cc of the HCI of 0.4M ina calorimeter. The temperature of ° the two solutions and the calorimeter wast7-05 7 The mass of calorimeter was 50g and its specific -ig-t ° heat capacity was 400K]g" K. after the reaction the temperature rose to 19.5° c -1p-1 Assuming the specific heat capacity of all the solution ig #200). Kg" *k . Calculate the standard enthalpy of neutralization. Solution Data Vb = 250 Mb = 04M Va =250 Ma =04M Q, = 17.05 Q@, = 19.55 4Q = 19.55-17.05 = 2.5kg
Source transcript — Page 82
(The para newaizaton done by postive ndute ett xed by ly group) Hence x k } ( oR Cc yey pilsdnrsrotsnalpes ainsi ir ear mu linahaineaiiieei fare & i ‘t Lien 5 4 sos sewn ws
Source transcript — Page 83
ws
Source transcript — Page 84
= But if the substituent in halogen, ortho product become major product why? Reason Halogens like Cl have very small atomic size, Thus they exert very small steric hinderance thus make incoming electrophile to substitute first at ortho carbons (for every two ortho) carbons there is only one para carbon). Deactivators with exceptional of halogens directs incoming eletrophile at meta position i.e. Deactivator (with exceptional halogens) are meta directors. This can be explained by considering i. Position of carbonium ion ii. Stability of intermediate carbonium ion. 1_POSTTION OF CARBONIUM ION . To understand this consider mesomerism (-M) in benzoic acid fe) ret o® 0° qo " a u C-0H c-Ol C-OH Cou G-08 i ) 1 Bi. Pp . ‘s SN a ~) ‘ — — LY YY © / From the above shown mesomerism it can be seen that despite the fact that carboxylic group (-COOH) deactivate the whole benzene ring ortho and para positions are more effected and hence meta carbon somehow become pereferd position for incoming eletrophile. Tl. STABILITY OF INTERMEDIATE CARBONIUM ION . Consider the electrophilic substitution reactions in benzoic acid. 1% CASE
Source transcript — Page 85
=
0 Reduction of Cu?* to Cu*
n we
NaOH
1) RCH + Cu(OH), “hh cote Gia + H₂O
Brickred ppt
oO
s " a NaOH 2 “ 3 .
ii) RC R'+ Cu(OH), ———no reaction{ There is no formationof brick
red brick ppt)
NOTE.
Benzaldehyde do not react with Benedict/ Fehlings solution
oO
le ll
ie
(0) + Fehlings / Benedict solution —---———~ No reaction
2) BY USING TOLLEN’S REACTION( silver mirror test)
+
With tollen’s reagents aldehyde being reducing agent reduce Ag to AT ie precipitate of AGS) which
appear as silver mirror hence the name mirror test) Aldehyde react with tollen’s (Ammoniacal silver
nitrate) form white ppt of silver which appear like mirror
Ketones being poor reducing Agent give negative mirror test
Le
oO
W
RCH + Ag(NH3),0H——>+RCOONH₂ + NH; + H₂O + Ag)
(Aldehyde) (Silver mirror)
WHILE
Source transcript — Page 86
= (e] I RC R’Tollens reagent —————> No reaction (Give negative test) ketone OTHER CHEMICAL REACTION. IODOFORM TEST. ¢ This is the test for presence of terminal methyl group is directly bonded to carbonyl group by giving yellow ppt of iodoform CHl, e For aldehyde only ethanal give iodoform test. Example ll NaOH(aq) i) CH₂ CCH3+ I, ———>CHI3+ CH3COONa+ H₂O ; NaOH(aq) ii) CH3CH₂ C CH3+ 21, ———*_ CHI3 + CH3CH₂ COONa+ Nal + H₂O A (Yellow ppt) Generally i] NaOH (aq) CH₂ CR+ Il, ——— RCOONa+ CHI,;+ Nal+ H2,0 A (Methylketone) NECTA 2000 PP; QN 14 (a) QN. Compound A which has an unbranched carbon chain, react methyl magnesium bromide to give after hydrolysis compound B. chromic acid oxidation of B gives C (CsH:00) or which gives crystal product with 2, 4- dinitrophenylhydrazine and a positive iodoform test.
Source transcript — Page 87
os
Source transcript — Page 88
* F where [hs oxidising agent . : : ° sore mvncnors oe
Source transcript — Page 89
a t os
Source transcript — Page 90
= oO Example i] CH; C-—Cl + H₂O ———~ CH;,COOH + HCl Ethanol chloride b/ Acidic hydrolysis of Nitrile Generally xt RNC + H₂O ——— RCOOH + other products Example CH;CH₂CN + dil.HCl ——> CH3,CH₂COOH Ill FORM GRIGINARD REAGENT Carbon dioxide reacts with Grignard reagent followed by acidic hydrolysis to form carboxylic acid. Generally:- o o i] i] Ht HLO c + RMgX __, RC-~OMgX ——+ RCOOH + Mg(OH)X i (Coz) Example H* H₂O CO₂ + CH;CH₂MgCl ——+ CH;CH₂COOH + Mg (OH)Cl PHYSICAL PROPERTIES OF CARBOXYLIC ACIDS
Source transcript — Page 91
= Carboxylic acid has highest boiling point among alcohol phenol carbonyl compound or easy other hydrocarbons with comparable molecular weight due to stronger hydrogen bonding existing between molecules of carboxylic acids. Alcohol phenol carbonyl compound or any other hydrocarbons because they come capable of making strong hydrogen bonding with water and high polarity of carboxylic group. Le o- " —- C-0O--H* Carboxylic acid is capable of undergoing dimerisation when it is in the hydrocarbon solvent it or any other similar solvent without hydrogen bonding le y, g-—c 6B \ R—C al —y ——— | n°) “a Dimer ACIDIC BEHAVIOUR OF CARBOXYLIC ACID Carboxylic acids have higher acid strength than alcohol and phenol. For aliphatic carboxylic acids strength depend on:- i/ length of carbon chain ii/ Type of substituent in carboxylic acid The acidic strength decrease with increase in length of carbon chain due to strong positive effect exerted by longer alkyl group. When substituent carboxylic acid is stronger electronegative element like halogens which exert -I acidic strength is increase due to following reason:-
Source transcript — Page 92
= BUT o COOH i et 0 ONa c -o + NaOH Oo 1@) —_— CHEMICAL TEST OF CARBOXYLIC ACIDS a/ REACTION WITH ALCOHOL Carboxylic acid reacts with alcohol in presence of acid ton 22 , RCOOH + R'OH——> RCOOR'+H₂O The reaction is very important in distinguishing carboxylic acid from phenol is phenol do not react with alcohol verifying that carboxylic acid is more acidic than phenol b/ REACTION WITH SODIUM BICSRBONATE Carboxylic acid reacts with sodium bicarbonate to give effervescence of carbon dioxide gas which turn lime water milky - COOH + NaHCO₂ ———~ —COONa + CO₂ + H₂O Turn lime water milky The reaction gives another difference between carboxylic acid and phenol as phenol do not give effervescence acidic than phenol. esreaction with Pels(lron(II!) chloride) osric chloride test carboxylic acid reacts with Fecl; to give Iron (III) carboxylic (alkanoate ) which appear as buff colourled compound
Source transcript — Page 93
= ie. 3 RCOOH + FeCl —— (RCOO)3Fe+3HCl Buff coloured The reaction is important in distinguish between alcohol, phenol and carboxylic acid « Alcohol give no change indicating that there is no reaction between alcohol and Iron (III) chloride (Fecl;) * Phenol give purple/violet coloured compound e Carboxylic give buff coloured compound . f/ FORMATION OF ESTER Acyl chloride reacts with phenol in presence of NaOH., form ester Le. R i] OH o o-c —® i] Og eb -aneee CY, we Example o iH I o-—c —CH₂ Acyl chloride also reacts with alcohol to form ester although with alcohol there is no need of NaOH(aq) Le. RCOCI + R'OH ——> RCOOR' + HCl E.g. oO I CH; C -—CH + CH3CH₂OH ——> CH; COOCH₂CH; + H₂O
Source transcript — Page 94
oe
